if the booster's causing this, (and it seems you've proven this by dumping vacuum and replacing)
then the pedal pushrod is not fully retracting out of the booster. There are a few things...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
"flat-brim-cap-wearing stancer noob"
I just bumped this thread to be a dick.
t
going to go get rip- roaring drunk now.
- Likes 1
Leave a comment:
-
"Petra Lemus" inspected your wheel. For some reason, that sounds both exciting and slightly... dirty.
Also makes me think 'Made in Poland' which, in 2002, was a good thing. (I...
Leave a comment:
-
The stinker is that, at least in theory, the tune is matched to the increased throttle body diameter.
So in my case, with Dinan throttle body, dirt- sucking intake, and (probably, but unconfirmed)...
- Likes 1
Leave a comment:
-
I've used Ross with good luck before-
hardly any more noise than stock, good durability.
Given that you're looking for parts for a 35 year old engine, the time to make
these...
Leave a comment:
-
I'm ham- fisted enough that I'd be afraid I'd use too much force and bend the valve.
At least, the first time I tried it. But valves are tough, and if you have a good sense feel,
why not?...
Leave a comment:
-
Given how much counterfeiting that's going on, I can see a business throwing their hands up and establishing a
'if you didn't buy it from a reputable chain, we can't touch it' policy.
...
Leave a comment:
-
You might be able to place some play dough or similar, using the camera for guidance, and roll the engine over, and see what the result is.
But typically, once the springs are on and the...
Leave a comment:
-
There is an alternate fan and housing for the non- AC cars (I have a Canadian- spec one)...
but that's not part of it.
t...
Leave a comment:
No activity results to display
Show More
Leave a comment: