Does the M50 & M52 use the same throttle body?
I used the E36 35411163228 for my M52B28. It fits well except that I had to take up some slack with an aftermarket cable end.
I saw...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
What TLC are you giving to the M42? I see the intake manifold is off.
Leave a comment:
-
Do a search on which pins to jump.
I would suggest building a jumper with a fuse inline just in case. It's what I use for some extra safety even though I'm careful about making electrical...
Leave a comment:
-
Nice looking ride!
I passed on a red late model late last year that was local. Your post is making me wish I bought it!
- Likes 1
Leave a comment:
-
All the wires in the right spots?
Had this exact same thing happen on my M52B28 starter, and I had the two small wires in the wrong spots!
Can't speak to the M20B25 starter, it might...
Leave a comment:
-
-
Stock vs Tinted vs DIY Startec Replica.
Intense overhead lighting here makes them all look brighter then IRL.
...
- Likes 2
Leave a comment:
-
Pump will prime when key is first turned on for about 5 seconds, but will then shut off again until the engine is running.
You can jump the fuel pump relay for testing if you want to keep...
Leave a comment:
-
Revshift 80A Polyurethane Differential, Subframe, Trailing Arm Bushings on my E30.
More NVH then stock rubber, but do a much better job of controlling suspension deflection.
Helped...
Leave a comment:
-
Yes it does help. I don't have the heat shields for the fuel tank anymore (originals rusted away).
I use it on my motorcycle as well to keep the heat off my boot.
Note that if you drive...
Leave a comment:
-
Try a different browser.
But it looks like there may be a "Cisco Secure Access" proxy/server filtering traffic before it hits your machine.
Leave a comment:
-
IMO the average newer car doesn't have the "fizz" of older stuff.
I don't care about the latest tech, so all the various screens and voice commands are actually negatives for me.
...
Leave a comment:
-
Not down, their security certificate just expired.
There should be an option to "allow/unsafe" somewhere on the browser page that pops up....
Leave a comment:
-
Swapped my chassis cross brace with the slightly cleaner one from my departed Bostongrun 328i.
Quick (after work) job yesterday of scraping, and wire wheel on the jack points. Got all the...
- Likes 1
Leave a comment:
-
I'd like to own an E39 manual, preferably with the V8.
Wouldn't be a long term car, but I'd like to see what all the hype is about!
Leave a comment:
-
Also known as a carriage bolt.
Have never heard of "saucer head" before, perhaps it's a lost-in-translation thing from german?
Leave a comment:
-
ETK plus something like this should have you sorted.
https://racegerman.com/products/pitc...6cafbb07&_ss=r...
Leave a comment:
-
That's a tough task, lots of plastic and complicated systems on a new engine.
Looks like you're making some good efforts towards it though....
- Likes 1
Leave a comment:
-
There should be two main positive feeds coming up from the battery.
The large one which goes to the starter, and a smaller cable (which has a fusible link in the trunk) I believe this is the one...Last edited by Panici; 04-16-2024, 04:50 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: