Announcement

Collapse
No announcement yet.

e36 OBD1 harness cutting instructions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    e36 OBD1 harness cutting instructions

    can i cut the auto transmission computer connector
    also which wires do i cut out,




    is this x20 connector for the auto trans?

    #2
    All of em. Pull em out of harness. One or two go to ecu connector just tape em off.

    Comment


      #3
      so where should i start cutting from the secondary x20 ?
      and do they just slide out ?

      Comment


        #4
        Your gonna end up taking the box apart just get it over with and then you can pull out everything from the connector back to the DME plug
        Shawn @ Bimmerbuddies
        Bimmerbuddies LLC
        717-388-1256
        2971a Roundtop Rd, Middletown PA 17057
        bimmerbuddiesllc@gmail.com

        Comment


          #5
          Yeah take cover off the harness box. Cut auto trans plug and start pullingthe wires to track em down. Cut them out.

          Comment


            #6
            AUTO TRANS PLUG as in the secondary x20 ?
            Originally posted by mpowerful View Post
            Yeah take cover off the harness box. Cut auto trans plug and start pullingthe wires to track em down. Cut them out.

            Comment


              #7
              Yes. Its not called x20 its something else. Anyway make sure you have the right one. Cut it off.

              Comment


                #8
                Yep, once you open the box, it will be very straightforward. As mentioned there are a few wires that go to the ECU that will be left over. I just individually capped them off.

                Comment

                Working...
                X