e36 M/S/5x Supertech Dual Valve Springs kit and valves, Steel Retainers - Black Nitride Intake Valves/Inconel Exhaust Valves
I'm selling a set of supertech valves and dual valves springs. I bought these valves and valve springs from a racer who had built an engine only to see it fail on the dyno. These were the valves and springs from that engine. Running for a few seconds on the dyno is the amount of time on these components.
2 intake valves and 2 exhaust valves were bent. There are some nicks around the single groove keeper area on the exhaust valves that I've tried to show. You will have to buy 4 new individual valves. 24 valve kit is about $670 new.
The dual valve springs and retainers all look good. I can't find 1 steel retainer. You will have to replace that 1 retainer or buy 24 new titanium retainers. At one point I had supertech on the phone and they said they would sell me 1 steel retainer even though it's not listed on their site. I can't find the price for just new retainers but the dual valve spring kit with titanium retainers is around $650.
Here's what's included:
Dual Valve Spring Kit with Steel Retainers - Missing 1 retainer
10 Inconel Exhaust Vavles std 30.5mm
10 Black Nitride Intake Valves std 33mm
To make the kit complete you need the following below.
BMEVI-1030S - (2) Inconel Exhaust Valves ($37.41)
BMIVN-1030S - (2) Black Nitrided Intake Valves ($25.51)
KPR-6S-7 - Single Groove Keepers ($1.60 each)
(1) Steel Retainer
This is about a $1300 kit new. To source the missing components will run $150-$200.
I'm asking $450 shipped for everything. You can complete the kit and still be at HALF of the price new.
Don't click the buy now Panjo button
List Date: 3/23/2017
For more info, click here to view the original listing: e36 M/S/5x Supertech Dual Valve Springs kit and valves, Steel Retainers - Black Nitride Intake Valves/Inconel Exhaust Valves
--------------------------------------
This item is no longer available.
--------------------------------------
I'm selling a set of supertech valves and dual valves springs. I bought these valves and valve springs from a racer who had built an engine only to see it fail on the dyno. These were the valves and springs from that engine. Running for a few seconds on the dyno is the amount of time on these components.
2 intake valves and 2 exhaust valves were bent. There are some nicks around the single groove keeper area on the exhaust valves that I've tried to show. You will have to buy 4 new individual valves. 24 valve kit is about $670 new.
The dual valve springs and retainers all look good. I can't find 1 steel retainer. You will have to replace that 1 retainer or buy 24 new titanium retainers. At one point I had supertech on the phone and they said they would sell me 1 steel retainer even though it's not listed on their site. I can't find the price for just new retainers but the dual valve spring kit with titanium retainers is around $650.
Here's what's included:
Dual Valve Spring Kit with Steel Retainers - Missing 1 retainer
10 Inconel Exhaust Vavles std 30.5mm
10 Black Nitride Intake Valves std 33mm
To make the kit complete you need the following below.
BMEVI-1030S - (2) Inconel Exhaust Valves ($37.41)
BMIVN-1030S - (2) Black Nitrided Intake Valves ($25.51)
KPR-6S-7 - Single Groove Keepers ($1.60 each)
(1) Steel Retainer
This is about a $1300 kit new. To source the missing components will run $150-$200.
I'm asking $450 shipped for everything. You can complete the kit and still be at HALF of the price new.
Don't click the buy now Panjo button
List Date: 3/23/2017
For more info, click here to view the original listing: e36 M/S/5x Supertech Dual Valve Springs kit and valves, Steel Retainers - Black Nitride Intake Valves/Inconel Exhaust Valves
--------------------------------------
This item is no longer available.
--------------------------------------