Getting the trailing arms back onto the subframe

[nefarious7907]

I have the axles still in the subframe and recruiting my friend jack this is awkward to say the least, and then when I did more or less get it into place I had to take it back off because I realized that the filler hose is in the way of getting one of the trailing arm bolt back in. Should I re-remove my subframe and asseble it or take the filler neck hose off? Does anyone have any tips or hints to make this as pain in the arse free as possible?

[kolunda]

The trick is to have half a tank of gas or less at the time you decide to take the trailing arms off, because you will have to take off the gas hose to get the bolt back in

[gazellebeigem3]

The trick is to have half a tank of gas or less at the time you decide to take the trailing arms off, because you will have to take off the gas hose to get the bolt back in

ahaha i learned this the hard way.

[nefarious7907]

Go figure, time to get wrench'n

[PУCCKAЯ_e30ka]

just wiggle that muthafucka in there!! It is a REAL PAIN IN THE ASS, but you can do it! I learned it the hard way (black IE3 are oversized!!!)