Revisiting m60b40/zf310 clutch options... new products!

[OldSkoolE3]

Sweet great info JGood. Thank you.

[Wanganstyle]

E36m3 clutch is happy with s54 power uncorked.

If desiring a spring loaded center have you considered using an aftermarket friction disc? Tons to choose from as 36m seems to be the most popular aftermarket setup to manufacture


Sent from my iPhone using Tapatalk

[36brua]

E36m3 clutch is happy with s54 power uncorked.

If desiring a spring loaded center have you considered using an aftermarket friction disc? Tons to choose from as 36m seems to be the most popular aftermarket setup to manufacture


Sent from my iPhone using Tapatalk

Any suggested Mfgr? clutchmaster,? spec?, etc Thnks

[alco]

So looking over the site again, for those who have an M62 and want to use TTV's flywheels, here is what you want:

http://ttvracing.com/product/bmw-m62-v8-to-m3-e36-s5052-clutch/?referrer=product-listing&iframe=true&width=80%&height=100%&type=flywheels&engine=bmw-m62&manufacturer=bmw

Part number is 2366

For those with M60 blocks, you want this:

http://ttvracing.com/engine-types/?manufacturers=bmw&type=flywheels#prettyPhoto[iframes]/16/

Part number is 1183

Either one allows the use of the E36 clutch kits.

[36brua]

I have been looking at e36 m3 clutch info. Am I correct in thinking that a e34 m5 clutch/ pressure plate has the same spline and bolt pattern as a e36??

[evandael]

^you are correct. the e34 m5 pressure plate + a clutchnet or spec e36m sprung hub clutch would hold a lot of torque and retain a stock-like feel.