Announcement

Collapse
No announcement yet.

re-occuring error codes after swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    re-occuring error codes after swap

    hi,
    by end of 2015 i swap'd my car from the m52b25 to the m60b30,
    everything works as expected but i would like to remove these codes from appearing.
    they all are related to stuff my car doesnt have.

    Code:
    tankenlueftungsventil       -> Tank venting valve
    klimakompressorsteuerung    -> Air conditioning
    Secondary air pump          -> sekundaerluftpumpe

    i dont have any of those,
    car is a 316i(m40b16) from 1989 (no obc/no airbag/no abs/no check engine light im in france)
    the engine is from a manual e32
    harness comes from an auto e32
    the ecu from an e38 (484-w/ no ews)

    i have a 404 that i dont use because no diagnostic/data-graph program works with it (testo/inpa) and i just keep it as a backup incase my actual one dies.

    how should i proceed to remove a/c & sap & charcoal canister related errors.
    Attached Files

    #2
    I have the Purge valve (Tank venting valve) code also. I'm looking for the answer still.
    Dumpster Fire Pilot

    Comment


      #3
      Originally posted by delamaize View Post
      I have the Purge valve (Tank venting valve) code also. I'm looking for the answer still.
      solution for that is here but that is if you want to wire it,
      not if you want to delete it (which is what i need).



      i wonder if i need a chip or if i must trick the system to somehow believe these items are present & if so, how?

      Comment


        #4
        bump,
        resolved the purge valve problem by wiring in a e36 one i had laying around,
        for sap i suppose i can ignore it allthogether or emulate it.

        but i'd like to remove the a/c related error,
        will removing the wiring/relay related to it solve my problem or do i need to wire in a resistor or some shit to fool the dme but then will this little guy mess with my idle and other things? (no i dont plan on adding a/c it's fairly cold here)

        Comment


          #5
          Did you cut out all the SAP wiring from the harness?

          OBDI M62B44/6 swap
          Transaction feedback
          - jpod999

          Comment


            #6
            Originally posted by jpod999 View Post
            Did you cut out all the SAP wiring from the harness?
            i dont have sap wiring on my harness,
            harness came from a 730 e32,
            ecu from a 730 e38 that's my problem.

            Comment

            Working...
            X