Announcement

Collapse
No announcement yet.

325e to 325i

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    325e to 325i

    Can a 84' 325e exhaust be used on anew 89' 325i. Not a permanent thing just don't have the $600+ to get a new one shipped to me and I have a 325e exhaust at my disposal. I know the 325i staysafe a double from block to tip and the 325e merges to one after headers. But can it work or has anyone bothered to try. Just can't stand the exhaust leak front the flex pipe anymore.

    Sent from my SAMSUNG-SM-G920A using Tapatalk

    #2
    Can a 84' 325e exhaust be used on a 89' 325i. Not a permanent thing just don't have the $600+ to get a new one shipped to me and I have a 325e exhaust at my disposal. I know the 325i stays a double from block to tip and the 325e merges to one after headers. But can it work or has anyone bothered to try. Just can't stand the exhaust leak from the flex pipe anymore.

    Sent from my SAMSUNG-SM-G920A using Tapatalk

    Comment


      #3
      Should work fine. You might not have as much top end and it might increase torque a bit.Make sure you can get the 3-wire oxy sensor out and that the threads are good as you will need the 4-wire sensor. The eta manifolds are smaller, but either should work. Who knows, you might like it.

      Comment


        #4
        Not only the above, but the Eta setup, being one pipe is cheaper to replace too.

        Personally, I think the one pipe design looks cleaner. And a one pipe design even gets done on swaps, like this S54 swap done up here in Canada (sadly, the guy who built this system doesn't do it anymore.)

        Estoguy
        1986 BMW 325, Alpenweiss ~ "Elsa"

        Need a photographer, come visit my site: http://estoguy.wix.com/unique-perspectives

        Comment


          #5
          It makes safety sense if you have a bad leak but my money is on you finding a steep loss of power from a choked engine
          Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

          https://www.r3vlimited.com/board/sho...86#post4944786
          Alice the Time Capsule
          http://www.r3vlimited.com/board/showthread.php?t=360504
          87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

          Comment


            #6
            You think it will choke the engine that much

            Sent from my SAMSUNG-SM-G920A using Tapatalk

            Comment

            Working...
            X