Got this OS Sherwood 6 channel sitting and collecting dust, not super power by any means, but good start:
35W RMS x 5 and 100W RMS x 1 into 4 ohms. 50W RMS x 5 and 130W RMS x 1 into 2 ohms. Not bridgeable. Big and heavy at 22.3" x 9.5" x 2.3" and 20 pounds. S/N ratio > 95 dB, T.H.D. < 0.03%. Channels 1-5 have built in crossovers which can be set to high pass or low pass at 80Hz, 12 dB/octave, or off. Channel 6 (Subwoofer) has a fixed low pass crossover at 60 Hz, 12 dB/octave, and also a switchable 6 dB boost at 60 Hz. Fuse ratings are 20A x 2.
$75 + shipping.





35W RMS x 5 and 100W RMS x 1 into 4 ohms. 50W RMS x 5 and 130W RMS x 1 into 2 ohms. Not bridgeable. Big and heavy at 22.3" x 9.5" x 2.3" and 20 pounds. S/N ratio > 95 dB, T.H.D. < 0.03%. Channels 1-5 have built in crossovers which can be set to high pass or low pass at 80Hz, 12 dB/octave, or off. Channel 6 (Subwoofer) has a fixed low pass crossover at 60 Hz, 12 dB/octave, and also a switchable 6 dB boost at 60 Hz. Fuse ratings are 20A x 2.
$75 + shipping.






Comment