(PA) '93 E34 Vanos M50 - Complete + RL 413 ECU***Perfect E30 swap motor***

[turboeta]

Hey guys, just listing the M50 that I had planned on putting in my E30...but I'm moving down to the US Virgin Islands and the speed limit is 15mph on the island:D



This is a 1993 and it has 115k, it came out of a automatic 525i that was hit in the back. It is definitely a strong motor. I bought about every new gasket I could and many other new parts (Thermo housing, rear main seal, water pump, thermostat etc..). Here's a list of everything that I got from AutoHaus AZ. Everything on this list will be included with the motor.

11621728983
Exhaust Manifold Gasket; At Cylinder Head


11611717259
Intake Manifold Gasket; Intake Manifold to Cylinder Head

11421719855
Oil Filter Gasket; Oil Filter Housing to Block


11421730389
Oil Filter Kit

12611277129
Oil Level Sender Gasket; O-Ring

11131437237
Oil Pan Gasket; Rubber/Metal

035121119
Thermostat Gasket/Seal; 60x3.5mm

11531740437
Thermostat Gasket/Seal; For Thermostat Housing

11531722531
Thermostat Housing/Water Outlet; Aluminum Update Replacement

11531712043
Thermostat; 92 Degree C; With Gasket


11141720639
Timing Cover Gasket; Lower Left


11141720638
Timing Cover Gasket; Lower Right

11121738701
Valve Cover Gasket

11121735721
Valve Cover Gasket; Spark Plug Hole Gasket

11511711484
Water Pump Gasket; O-Ring


11721437202
7mm Lock Nut; Exhaust Manifold to Head


11431287541
Dip Stick Tube Seal; O-Ring Oil Dipstick Tube to Oil Pan; 14.5x3mm

11121744057
Stud 7x42mm; Exhaust Manifold to Head

11611716174
Throttle Body Gasket

11361740840
Vanos Unit; Gasket for Vanos/Camshaft Cover on Cylinder Head

11121738963
Water Outlet Gasket; At Cylinder Head Rear

11511722536Z
Water Pump; Update Replacement with Metal Impeller and Gasket


11141432240
Crankshaft Oil Seal; Rear Crank Cover Gasket, Metal


11142249533
Crankshaft Oil Seal; Rear; Updated Version; 90x110x12mm


0280130026
Engine Temperature Sensor; Blue


12611730160
Oil Pressure Switch; With 1 Pin Injector Type Electrical Connector

12621747281
Oil Temperature Sensor; 130 Degree C; 2 Prong Injector Type Connection


The motor will come with a complete un-cut E34 harness, E34 motor mount arms, a red label 413 ecu, and all accesories. It will need a couple parts though..

1. Spider coolant hose, depending on what it is going in to.
2. Water pump pulley
3. Knock Sensors
4. The top right mounting point for the thermostat housing got chipped during shipping when I bought the motor. I still have the piece and JB weld would work to fix it, or it could be tig welded. Eitherway, it's not a big deal.
5. Stock Injectors, I've been looking for a set to go with the motor..typically they are about $30-40 a set. I also have a set of brand new flow matched 42lb Racetronix injectors for $265.
6. It will not come with a clutch or flywheel.

That's all I can think of right now, but I am going to revise this ad tonight so that list may get longer. I'm just trying to be as honest as possible with you guys. I will also get some real non-iphone pictures of the motor.

Price is $1200 OBO For shipping it will be anywhere from $100-$400 depending on where you live. Local pick up is also offered.

If you have any questions, you can PM me, or email me at turboeta@gmail.com.

Thanks guys,

-Karl

[turboeta]

ttt

[dude8383]

is that an OBD II valve cover?

[turboeta]

Nah, its just painted black

[turboeta]

Bump, make some offers...

[turboeta]

bump...

[MIKe30]

comp #'s?

[e30this]

comp #'s?

hahaha, So I take it this will go in the 318??

[itsbrokeagain]

hahaha, So I take it this will go in the 318??

your car is stupid clean. On the other hand, I wish I could grab this motor up. I desperatley want an M50 to drop into mine.

[MIKe30]

hahaha, So I take it this will go in the 318??

m20's not in yet :p but i'm not jumping on an m50 unless it's a DEAL.

[e30this]

DO IT!!!.. Drop everything off at my house and I will install it for you. :)

[turboeta]

Don't have the compression numbers right now, but i'll get them tonight for you.

[MIKe30]

DO IT!!!.. Drop everything off at my house and I will install it for you. :)

if you're serious and you think we can get it done in a weekend I may take you up on that. pm me...

bump again for comp #'s (even though you said tonight) :)


also need to know where in pa you are located.

[e30this]

if you're serious and you think we can get it done in a weekend I may take you up on that. pm me...

bump again for comp #'s (even though you said tonight) :)


also need to know where in pa you are located.

I can do it in a day if you have everything before we start.

[turboeta]

The motor is in Valley Forge, like 30 minutes west of philly