SOLD: Lots of M20 Turbo Parts!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jaywood
    R3V Elite
    • Jul 2010
    • 4528

    #1

    SOLD: Lots of M20 Turbo Parts!

    I have decided to part with my turbo car. I am selling the turbo kit n pieces. It has treated me right for the past year. I'd say I put about 5k miles on the setup. I forgot to keep track...but I didn't drive much. To and from school and the occasional weekend drive. I had this setup to run about ~8 lbs of boost. It was quite responsive, but just like any turbo there will be a bit of lag.



    Local pick up is preferred of course but I will ship at buyers expense. Exhaust is not shippable.



    Details
    T3 Turbo ($75 shipped)
    eBay turbo manifold. Modifications to the oil filter housing will have to be made. You can either use flexible oil lines for the oil cooler, or just cap the holes. I used a plug from home depot and some high temp RTV and it worked pretty well. I didn't run an oil cooler. ($75 shipped)

    30lb injectors, Turbo chip, Begi 2025 RRFPR. Adjusted for 30lb injectors and 8lbs of boost. (would like to sell these together. $350 shipped)

    Intercooler with mounts ($70 shipped)

    2.5" downpipe with wastegate attached. Welded bung for LC-1 ($100 shipped)


    Pictures:











    Chip



    My build thread: http://www.r3vlimited.com/board/show...=193566&page=6

    Sound clips:



    Had an exhaust leak that I fixed...



    Those are the only 2 videos I have. It sounded very nice. There was no highway drone either which was nice.
    Last edited by jaywood; 08-22-2012, 09:51 AM.
  • jaywood
    R3V Elite
    • Jul 2010
    • 4528

    #2
    Bump!

    Comment

    • jaywood
      R3V Elite
      • Jul 2010
      • 4528

      #3
      Ttt!

      Comment

      • alex1979
        Noobie
        • Jul 2012
        • 19

        #4
        gains?

        What kind of power gains can i expect from this setup? I have stock m20b25

        Thanks

        Alex

        Comment

        • jaywood
          R3V Elite
          • Jul 2010
          • 4528

          #5
          It depends how much boost you want to run. There have been guys running 11lbs with an RRFPR and a chip.

          I was probably at 260hp when hitting 8lbs of boost. I never had it dynoed...I am just going off of other people's dyno's that had a similar setup to mine.

          Comment

          • jaywood
            R3V Elite
            • Jul 2010
            • 4528

            #6
            Bump!!

            Comment

            • jaywood
              R3V Elite
              • Jul 2010
              • 4528

              #7
              ttt.!

              Comment

              • Mtechnik2
                Member
                • Jul 2012
                • 57

                #8
                Are you willing to part out yet...? :)

                Comment

                • HamiltonSeth
                  Advanced Member
                  • Jun 2011
                  • 118

                  #9
                  I'm interested. Sending pm
                  88 M3 - S54

                  Comment

                  • usingthejohn
                    Member
                    • Dec 2011
                    • 76

                    #10
                    What kind of gains would be made on a 327 stroker?
                    Needs: Working window regulators for my E30 sedan;)

                    Comment

                    • jaywood
                      R3V Elite
                      • Jul 2010
                      • 4528

                      #11
                      Not willing to part yet.

                      Sent you a text, Seth.

                      Depends how much boost you run. There are many variables. Not quite sure about a stroker either.

                      Comment

                      • usingthejohn
                        Member
                        • Dec 2011
                        • 76

                        #12
                        Just looking for best way to get to 250-275rwhp on a stock block.
                        Needs: Working window regulators for my E30 sedan;)

                        Comment

                        • jaywood
                          R3V Elite
                          • Jul 2010
                          • 4528

                          #13
                          Originally posted by usingthejohn
                          Just looking for best way to get to 250-275rwhp on a stock block.
                          This will do it. Easily.

                          Comment

                          • jaywood
                            R3V Elite
                            • Jul 2010
                            • 4528

                            #14
                            Bump.

                            Comment

                            • jaywood
                              R3V Elite
                              • Jul 2010
                              • 4528

                              #15
                              Ttt!

                              Comment

                              Working...