Hey everyone. I've decided that I'm going a different direction with my car and building it for NASA Spec E30 so all my swap parts need to go! Everything is still currently on the car, so as soon as I pick up a new daily, this thing is going to be torn down. I will take deposits if you really want something. I'm planning on tearing it down, within the next week or two.
I'm sure there's a bunch of parts that I'm missing, so if there's something that you need and it's not listed, ask!
Thanks,
-Jeff
E36 Oil pan/pickup/tube
$75.00
Euro S50B30 Flywheel/clutch
$125.00
ZF Trans- No issues, grinding, or sticking in gear. Fresh redline fluid 2 months ago (includes large guibo)
$300.00
M50 Manifold
$75.00
Custom made M/S50 swap skid plate, 1/8" Steel. It's not the prettiest thing, but it's freshly powdercoated.
$100
S50 Non-threaded Starter
$40
S50 Fuel Rail w/ 17.5# Injectors and brand new FPR
$80
E36 M3 HT-10 Rear pads
$50
E36 Non-M Steering Rack (includes almost new tie rods and rack spacers for an e30)
Sold
E36 Motor mount arms
Sold
E30 Tool Kit
Sold
413 Red Label DME w/ Turner Chip (3.5” Intake, 17.5# Injectors, Exhaust)
Sold
AFE Dry-flow Filter 3.5" ID - Like new!
Sold
S50 Oil Filter housing
Sold
E34 Oil pan/pickup/tube
Sold
S50B30 Cams/trays- Good condition, very little scoring
Sold
S50B30 Block- Good shape, rod bearings replaced before putting into car (precautionary)
Sold
S50 Engine Covers-
Sold
* S50B30 US Head- Includes valves. *Recently machined, valve seals replaced, pending condition..*
Sold
Full Custom Exhaust- Supersprint Rep Headers-> Vibrant 2-1 Merge Collector->2.5” single with a Vibrant Ultraquiet resonator and Super Street Muffler. V-bands post collector and at the rear subframe
Sold
I'm sure there's a bunch of parts that I'm missing, so if there's something that you need and it's not listed, ask!
Thanks,
-Jeff
E36 Oil pan/pickup/tube
$75.00
Euro S50B30 Flywheel/clutch
$125.00
ZF Trans- No issues, grinding, or sticking in gear. Fresh redline fluid 2 months ago (includes large guibo)
$300.00
M50 Manifold
$75.00
Custom made M/S50 swap skid plate, 1/8" Steel. It's not the prettiest thing, but it's freshly powdercoated.
$100
S50 Non-threaded Starter
$40
S50 Fuel Rail w/ 17.5# Injectors and brand new FPR
$80
E36 M3 HT-10 Rear pads
$50
E36 Non-M Steering Rack (includes almost new tie rods and rack spacers for an e30)
Sold
E36 Motor mount arms
Sold
E30 Tool Kit
Sold
413 Red Label DME w/ Turner Chip (3.5” Intake, 17.5# Injectors, Exhaust)
Sold
AFE Dry-flow Filter 3.5" ID - Like new!
Sold
S50 Oil Filter housing
Sold
E34 Oil pan/pickup/tube
Sold
S50B30 Cams/trays- Good condition, very little scoring
Sold
S50B30 Block- Good shape, rod bearings replaced before putting into car (precautionary)
Sold
S50 Engine Covers-
Sold
* S50B30 US Head- Includes valves. *Recently machined, valve seals replaced, pending condition..*
Sold
Full Custom Exhaust- Supersprint Rep Headers-> Vibrant 2-1 Merge Collector->2.5” single with a Vibrant Ultraquiet resonator and Super Street Muffler. V-bands post collector and at the rear subframe
Sold
Comment