FS: CONDOR UHMW & Aluminum Powersteering Deletes

[minsanity]

Thanks, Ghost. These are from real OEM

[silence]

It looks very similar to the e30 rack. How close together are the input and output banjo bolts?
Re: your comment about driving with no power steering. You can't compare a dead pump to deleting your power steering. When you delete power steering you remove most of the fluid from the rack. When a pump dies, the fluid is still in the rack creating resistance...

[minsanity]

It looks very similar to the e30 rack. How close together are the input and output banjo bolts?

Ghost, hope you can answer this.

Re: your comment about driving with no power steering. You can't compare a dead pump to deleting your power steering. When you delete power steering you remove most of the fluid from the rack. When a pump dies, the fluid is still in the rack creating resistance...

This is what I was thinking.

Thanks.

[minsanity]

How much fluid do you actually remove upon deleting the pump, silence?

[Da_Ghost_Qc]

How much fluid do you actually remove upon deleting the pump, silence?

Not that much, when I changed my pump, I had some remaining in the can after filling it back up (reservoir, line to pump and the actual pump).

I added some pics in the album. http://imgur.com/a/5U8Ru

For the exact measurements, you might be better of checking them yourself! Born and raised in the metric system and I don't work in construction :nice:

[minsanity]

Just saw the added pics, those should help silence check.
Thanks!!!!

[minsanity]

Silence, having seen those pics from Ghost, I believe the e30 block won't work, right? Would you be able to fab 1 for us? & if so, what's the cost we'd be looking at? I suppose you'd have to get hold of an R50/53 rack for precision.

[silence]

How much fluid do you actually remove upon deleting the pump, silence?

You need to remove 90% of the fluid in the rack.

Silence, having seen those pics from Ghost, I believe the e30 block won't work, right? Would you be able to fab 1 for us? & if so, what's the cost we'd be looking at? I suppose you'd have to get hold of an R50/53 rack for precision.

Yes my delete will not work, but i know I can make something that will. I will need a rack to take measurements from. Do any of you have an old one you can send me? the cost would be similar to the e30 delete... possibly a fraction higher depending on the manufacturing process.

[minsanity]

I'll try to post it on the MINI boards. Hope someone can donate a junk rack. Thanks for the prompt reply, silence!

[silence]

I'll try to post it on the MINI boards. Hope someone can donate a junk rack. Thanks for the prompt reply, silence!

no problem, keep me posted.

[minsanity]

Just posted over at NAM, m|u, motoring alliance & minitorque across the pond. Hope someone can send over a donor rack. Do keep us posted. Thanks, silence!

[minsanity]

Posts:
http://www.motoringalliance.com/foru...#axzz2xpz9upUW

http://www.motoringunderground.com/forum/showthread.php?p=796532#post796532

http://www.minitorque.com/forum/f29/junk-gen1-steering-rack-needed-power-steering-pump-delete-kit-40386/

http://www.northamericanmotoring.com/forums/r50-r53-hatch-talk-2002-2006/268218-need-a-junk-r50-53-steering-rack-for-power-steering-pump-delete-kit.html

[silence]

FYI all i need is the part that the banjo bolts screw into. someone could potentially put the rack on a bandsaw, and cut the ends off so it fits in a small box.

[minsanity]

You're still based in Ft. Lauderdale, right? Hoping a volunteer local or near you would show up. MINI racks aren't prone to failure. The pumps are. I doubt we could find junk racks that one would dare cut & send over. It's a long shot. Your local salvage yard can lend you, perhaps? Your kit would include the bolts?

[silence]

You're still based in Ft. Lauderdale, right? Hoping a volunteer local or near you would show up. MINI racks aren't prone to failure. The pumps are. I doubt we could find junk racks that one would dare cut & send over. It's a long shot. Your local salvage yard can lend you, perhaps? Your kit would include the bolts?

Yes im in ft. lauderdale, If necessary i may include bolts, but it would drive the cost up some.