Updated 05/26/15 For sale 15x7.5 et 32 wheels

[rzerob]

05/26/2015 I originally had these for trade or sale. I just bought a set of the wheels that I wanted so now they are just for sale. If you want any additional pics let me know. I am asking $500 but make me an offer. Shipping is on the buyer.

I have a set of Konig Rollers for sale. They are 15x7.5, 4x100 and et.32. I had the centers powder coated last year and bought four new tires. The wheels and tires have around 1000 miles on them since refinished. If you have any questions please contact me.

[rzerob]

I forgot to mention my location.

Mount Union PA 17066

[rzerob]

Bump

[rzerob]

I edited original post. Added a pic and price.

[rzerob]

Other stuff for sale. http://www.r3vlimited.com/board/showthread.php?t=339120

[JustAGuy]

I am looking for 16" because my car sits low and I could use an extra inch off the ground.

Uuuuhhhhhh, I think it's important you know it doesn't work this way. Not even remotely. If your car sits low, you'll want to take other measures.

[rzerob]

Uuuuhhhhhh, I think it's important you know it doesn't work this way. Not even remotely. If your car sits low, you'll want to take other measures.

If I run the same size side wall tire on a 16" wheel and adjust my coilovers for the same fender gap. I should be an inch higher.

[JustAGuy]

1/2", yes. That's certainly one way to do it.

[GAbOS]

1/2", yes. That's certainly one way to do it.

Correct.

You do gain a full inch of actual tire height, but you have to remember that's .5 on each side of the axle, putting a half inch from the wheel hub to the ground. If you stay on the same spring setup, then it brings the tire closer .5 to the wheel well as well.

[rzerob]

Bump

[nikokroha]

Pretty interested in em man. Just wondering if I can get an exact and accurate Et on them? I've got a '74 2002 and need to make sure the backspacing will work.

[rzerob]

Pretty interested in em man. Just wondering if I can get an exact and accurate Et on them? I've got a '74 2002 and need to make sure the backspacing will work.

With or without tires? The et is printed on a tag on the inside of the wheel if I remove the tire I could send you a pic of the tag.

[rzerob]

Bump

[JustAGuy]

With or without tires? The et is printed on a tag on the inside of the wheel if I remove the tire I could send you a pic of the tag.

I'm really not trying to give you a hard time, but it seems you are making this more difficult than it needs to be. You can just pull a wheel and look at the back side of it where I'm sure the offset is cast. You won't need to remove a tire. Just take a few minutes and you'll be set.

[rzerob]

I'm really not trying to give you a hard time, but it seems you are making this more difficult than it needs to be. You can just pull a wheel and look at the back side of it where I'm sure the offset is cast. You won't need to remove a tire. Just take a few minutes and you'll be set.

I will check and then PM you.