alright, lots of things will be happening this week since im on paid vacation. i took the vacation just to mellow out and wrench on the car. i made up the steering intermediate shaft, its half Buick Terraza (minivan) and half 95' M3. i also got around to finally chopping off the t3 flange and welding on the modified t4 flange. got the wastegate v band installed, still have to modify the dump tube since its from the cavalier. lots more updates will be coming!!
Announcement
Collapse
No announcement yet.
my oddball GMW
Collapse
X
-
today i decided to take a break from the engine bay after finishing the crossover pipe. converted from t3 to a modified T4 flange to fit the goofy holset bolt pattern, ceramic coated and wrapped the pipes in wrap, which was silicone sprayed after. i decided to take a break after finishing up the pipe, and concentrated on the fuel supply system. I cut out the spare tire well, made up a 26 3/4'' circle out of 16 gauge mild steel, and it just fit like a glove. i went with pop rivets more for looks after deciding that the factory sound deadening was a bitch to remove. cut out the holes for the sending unit, filler, and return. i still have to cut a hole for the vent/tip valve. tomorrow i will be mounting the fuel pump and hard lines. more to come!
Comment
-
Looks ill, keep up the good work!
I remember I took a week off work a few years ago to put an m30 into my e30, I'm a mechanic by trade so having time and patience to work on my own car is rare.
Sure did suck going back to work after though...///Monstrosity. (OO≡≡[][]≡≡OO)
Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.
Comment
-
so been busy with having all week off. i got the fuel system finished for good.. mounted up the pump on msd box vibration studs since its kinda loud. ran 1/2'' moroso piping for the feed with -8 ends, and as for the return i used 3/8'' piping with -6 ends, all in all its all really clean and i like how the fuel system turned out. Got the trunk wiring completed as well, integrated the end of the new harness into the bmw tail lamp harness. fuel pump wiring/ relay circuit completed with pass-through so fuel pump circuit can be removed as an assembly with the fuel tank. Another mode made while i had a huge hole in the floor out was an extra differential support. i used an old front transmission mount with a poly mount from my roommates evo (in the background in some pix), still need to made the other half which will be bolted in unlike the other side of the mount.
Comment
-
Anymore progress?
I found your build on a 60degree forum when I was researching these motors. I'm considering and LY7 for my E30 in N/A form. I would love to pick your brain a bit.Build : Das Drehmoment Ungeheuer
Comment
-
sorry for the delays in pictures and progress, ive lately been putting in some hours in details of the engine bay. gauge cluster built, gauges in and wired, lots of wiring finished. oil cooler in a mounted, water pump wired and plumbed, coolant expansion tank (will be air brushed to look like a grenade) with custom mount, alternator mount changed for something nicer, modified military surplus ammo can to become a catch can.. too much more to list. ill let the pictures do the talking.
Last edited by 86_325_GMW; 12-05-2012, 04:07 PM.
Comment
-
small update. covered the water to air coolant hoses in the loom, also got new fittings in on the intercooler and filled the cooling system up. Charge pipes finally in and powder coated and clamped up. I got around to figuring out the throttle cable situation, picked up a ls1 throttle cable from lokar. The bracket is rough until my aluminum one shows up from a buddy. Primed up the oiling system and checked for any leaks, and i guess im fuel, and a few wires away from firing it up!!!
Comment
Comment