So I have a M52b28 OBD II swapped in the e30. The previous owner of the motor had done the OBD I intake manifold swap. However, it only has one support bracket bolted to the manifold, and there isn't another one.
Looking at realoem, they are different supports for OBDI vs OBD II. Do either version of the supports work? Does one set work better?
Also I currently have the crank case oil seperator and idle control valve just hanging out beneath the intake unsupported. Where are these supposed to mount to? Do they mount on the intake supports?
Looking at realoem, they are different supports for OBDI vs OBD II. Do either version of the supports work? Does one set work better?
Also I currently have the crank case oil seperator and idle control valve just hanging out beneath the intake unsupported. Where are these supposed to mount to? Do they mount on the intake supports?
Comment