BBS RS 211 fitment question

[e30_vt]

Before you say it, I have used the search button and have not been able to find a concrete answer.

I have the opportunity to purchase some 16x7.5 and 16x8 et 11 BBS RS's 211 in a 5x120 bolt pattern. I have a set of 18mm adapters. This would bring the final offset to - 7mm. I am currently bagged.

1. Could these wheels fit without fender rolling or pulling?

2. Would fill/drilling the wheels be the better option?

3. What tire size would be most appropriate?

Thank you all for your help in advanced.




Sent from my iPhone using Tapatalk

[M-technik-3]

Suggest cleaning them up and selling them as a 5x120 to E30 M3 crowd or other 5x120 users. For the amount it would cost to fill and drill you could just reinvest that into some proper 4x100 16x7.5's aka rs003

Love mine.

[eLKuRLy]

let me know if you plan on selling these.

[frshmaestro]

I think they'd fit with 205-45 tires without pulling. I'd look at what people who are on 16" style 5 wheels that run adapters. That option has a lower offset.


Sent from my iPhone using Tapatalk

[frshmaestro]

Wait, I read your post wrong. Are your wheels going to have an offset of 11 or 7 as the final product. If the wheels have an offset of 11 and pushing them out another 18mm would leave way too far out


Sent from my iPhone using Tapatalk

[M-technik-3]

let me know if you plan on selling these.

There is a non staggered set of 7 on S14.net