Yesterday the car would not start, I searched and found no fuel diagnostics. I did the bridging of #30 & 87 on the pump relay and no pump.
I got a Walbro 255, installed it, it ran when bridging 30 & 87 before I put the assembly back together.
I buttoned it up, the car ran for a few minutes and then died. Now I get no pump from bridging 30 & 87 and as the mechanic removed the mount for the relay when I tried another relay I'm not positive I put the wires back correctly. I have a red at 30, a single brown green at 87 a red white at 86 and two brown greens at 85. (he put them in a single female spade connector)
I have 12v at 30 and when I give the pump 12v directly it runs.
I have searched and searched for the wire colors at the different points with no success. Can someone please post what belongs where and also wtf do I do now?
This is truly driving me crazy.
Gracias!
I got a Walbro 255, installed it, it ran when bridging 30 & 87 before I put the assembly back together.
I buttoned it up, the car ran for a few minutes and then died. Now I get no pump from bridging 30 & 87 and as the mechanic removed the mount for the relay when I tried another relay I'm not positive I put the wires back correctly. I have a red at 30, a single brown green at 87 a red white at 86 and two brown greens at 85. (he put them in a single female spade connector)
I have 12v at 30 and when I give the pump 12v directly it runs.
I have searched and searched for the wire colors at the different points with no success. Can someone please post what belongs where and also wtf do I do now?
This is truly driving me crazy.
Gracias!
Comment