Announcement

Collapse
No announcement yet.

What is this thing?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What is this thing?

    I found this loosely hanging from the front end on the car on the drivers side. What is it?


    #2
    Ambient Air Temp Sensor. It belongs behind the front valance.

    Comment


      #3
      Originally posted by Farbin Kaiber View Post
      Ambient Air Temp Sensor. It belongs behind the front valance.
      Should I just leave it hanging there?

      Comment


        #4
        No, you should re-secure it. You shouldn't leave anything hanging, that's just asking for it to get torn off.

        Comment


          #5
          Originally posted by Farbin Kaiber View Post
          No, you should re-secure it. You shouldn't leave anything hanging, that's just asking for it to get torn off.
          Okay, thanks!

          Comment


            #6
            At least, get it an athletic supporter or something...
            now, sometimes I just mess with people. It's more entertaining that way. george graves

            Comment


              #7
              Hey there, I also have something I can't identify and I hope it's ok to pin it here. It's hanging from the same general location (front driver-side under the valance) and I can't exactly follow the wires back to the fuse box or anything else. Thanks in advance!
              Attached Files

              Comment


                #8
                Brake Lining Sensor Connector.

                EDIT: Oops, I only read front drivers-side.
                Last edited by Farbin Kaiber; 05-10-2014, 03:20 PM.

                Comment


                  #9
                  Originally posted by Farbin Kaiber View Post
                  No, you should re-secure it. You shouldn't leave anything hanging, that's just asking for it to get torn off.

                  look under car at the brake airduct #5 in link you should find a hole in the side of the duct (if its there) that the outside temp sensor snaps into

                  Angus
                  88 E30M3 X2
                  89 325IX
                  92 R100GS/PD
                  :)

                  Comment


                    #10
                    Originally posted by Oaklandia30 View Post
                    Hey there, I also have something I can't identify and I hope it's ok to pin it here. It's hanging from the same general location (front driver-side under the valance) and I can't exactly follow the wires back to the fuse box or anything else. Thanks in advance!

                    that is the two pin connector for the above temp sensor ,your sensor is missing probably ripped off like OP's will be if not secured.... timely post
                    Angus
                    88 E30M3 X2
                    89 325IX
                    92 R100GS/PD
                    :)

                    Comment

                    Working...
                    X