The u-joint is bad and I don't have the time to weld a new tube and yoke on it. What's the best option? I was told I could get an inner clip u joint possibly? Anyone have any info on that?
-
-
The u joints are not serviceable unless your drive shaft has been modified. Either buy a rebuilt from someone like Driveline Services or by a used one (which I happen to have form my 87 Cabrio auto trans)Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com
https://www.r3vlimited.com/board/sho...86#post4944786
Alice the Time Capsule
http://www.r3vlimited.com/board/showthread.php?t=360504
87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220 -
I rebuilt the drive shaft on a 318is recently. I used e28 ujoints. There is a write up on bimmernut.com in the 5 series section.
You need some tools and a bit of patience. I modified a fixture on a wood turning lathe to balance it and it turned out quite nicely for under $100.Comment
Comment