Announcement

Collapse
No announcement yet.

FS: E30 24v swap brake conversion "kit"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS: E30 24v swap brake conversion "kit"

    Today, I offer for sale the following parts. All parts are new and out of the box, with the exception of the master cylinder, which is used. All parts functioned as they should, but the booster was no good, so the customer went a different route.

    -new 2002 ATE manual brake master cylinder remote reservoir
    -new FTE brake master cylinder grommets
    -new FTE brake master cylinder connectors
    -new soft clutch hose
    -used OE 750i master cylinder

    Basically, this is a plug and play braking setup with a 24v engine with 325ix brake booster. This is all the little components needed for the conversion. You will still need a brake booster, as I do not have one to include with sale.

    $160 shipped in the lower 48 for all parts or best reasonable offer.
    Last edited by e30austin; 04-09-2017, 09:58 AM.
    '72 2002 pickup | '88 M5 | '89 330is | '89 M3 | '01 Z3M | '11 328xi-t


    #2
    Having just accumulated these very parts I will say this is a very fair offer. Someone else needs to join the ETA 731 club

    Free bump
    Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

    https://www.r3vlimited.com/board/sho...86#post4944786
    Alice the Time Capsule
    http://www.r3vlimited.com/board/showthread.php?t=360504
    87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

    Comment


      #3
      I wanted to join this group and still want to... someday maybe
      Simon
      Current Cars:
      -1999 996.1 911 4/98 3.8L 6-Speed, 21st Century Beetle

      Make R3V Great Again -2020

      Comment


        #4
        If someone with an ETA reads this and doesn't buy your parts they should turn in their e30 keys

        Build sheet Owner                 Nick head                    731 with 42mm intake valves fitted (std 885 head) and Rhd porting Cam                     custom low comp grind 272 duration 11mm lift Bottom end         Stock low compression eta 2.7, 135mm rods, 8.5:1 pistons Intake                  RHD ITB's Continue Reading
        Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

        https://www.r3vlimited.com/board/sho...86#post4944786
        Alice the Time Capsule
        http://www.r3vlimited.com/board/showthread.php?t=360504
        87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

        Comment


          #5
          can you ship the 731 head to 30542?
          sigpic

          Comment


            #6
            Still have harness and oil pan. Bump.
            '72 2002 pickup | '88 M5 | '89 330is | '89 M3 | '01 Z3M | '11 328xi-t

            Comment


              #7
              PM'd about engine harness

              Comment


                #8
                need a "731" head!

                Comment


                  #9
                  Bumping this thread with a new for sale topic.
                  '72 2002 pickup | '88 M5 | '89 330is | '89 M3 | '01 Z3M | '11 328xi-t

                  Comment

                  Working...
                  X