Magnus Racing E30 Control Arms - Neue Motorsports - No Longer Available

[Dylanhat]

Magnus Racing E30 Control Arms - Neue Motorsports

Neue Motorsports is the proud US vendor for Magnus Racing out of Finland. Over the past 6 months or so they have developed a brand new front control arm for E30s. Here's some info from our website:

These control arms are made for E30 chassis to accept and correct the front end geometry using E36 or E36-M spindles.
E36-series spindles are often used to get 5-lug bolt pattern, but they also have better variety of brakes and coilovers than E30-series. Spindle itself has better geometry for racing as it is closer to E30 M3 variants.
The most notable advantages are correct wheel location and roll-center/bump steer correction which are decayed when substantially lowering the car. On the side the adapter plate also makes the steering ratio quicker Kit only has about half the weight of orginal cast control arms.
The kit offers chance to adjust front end the way you want it; width, caster and anti-dive properties are all adjustable.

This is pure motorsports from the E30 DTM era

List Date: 8/3/2016

For more info, click here to view the original listing: Magnus Racing E30 Control Arms - Neue Motorsports
--------------------------------------
This item is no longer available.


--------------------------------------

[dbplays]

I can't believe this didn't get more attention. Looks like the best 5lug swap idea that I've seen yet....

[E30SPDFRK]

Will these work on a normal 4 lug e30 if you don't use the billet part in the last picture?

[5Toes]

has anyone dared to street this? haha cant imagine..

[ThatOneEuroE30]

Need something like this for the 2002

[Dylanhat]

Will these work on a normal 4 lug e30 if you don't use the billet part in the last picture?

There is now!
http://www.neuemotorsports.com/store...-lug-pre-order

has anyone dared to street this? haha cant imagine..

According to Magnus Racing Team they don't make any noise and are totally streetable.


These kits are currently for pre-order and will take a minimum of 6 weeks to produce and 2 weeks to ship.

These control arms are made for E30 chassis to correct and improve the front end geometry using orginal 4-lug spindles.
The most notable advantages are improved roll-center and bump steer properties which are decayed when substantially lowering the car.
On the side the adapter plate also makes the steering ratio quicker.
Kit only has about half the weight of orginal cast control arms.
The kit offers a chance to adjust front end the way you want it; width, caster and anti-dive properties are all adjustable.

Compatible with orginal or any aftermarket tie-rods.
Optional orginal location sway bar mounts.
Steering reducers might be needed depending of the wheel setup.
Minimum wheel size 16".
Requires welding of the rear mount extra fastener.

More info and order:
http://www.neuemotorsports.com/store...-lug-pre-order

[brett_duenas]

Im drooling. REALLY wish this had been released a couple months ago... i'm already at the top end of my $12k build budget :( if you ever think of offering a sponsorship, I'd definitely be interested.

[Dylanhat]

Im drooling. REALLY wish this had been released a couple months ago... i'm already at the top end of my $12k build budget :( if you ever think of offering a sponsorship, I'd definitely be interested.

Sorry but we don't do sponsorships.