I posted it everywhere where i can think of that is iX specific. Thanks again for the iX support.
Announcement
Collapse
No announcement yet.
E30 325i DSSR (187mm units)
Collapse
X
-
Have you guys gotten a chance to test fit it on an ix?My Garage
2001 Z3 2.5i Steel Gray/Black (Lexi)
1988 325ix Diamond Schwartz/Black (Izzy)
1989 325i Cirrus Blue/Houndstooth (Stitch)
Feedback
Instagram: Stone.Hopkins
Comment
-
Originally posted by stonea View PostHave you guys gotten a chance to test fit it on an ix?
Comment
-
Once you guys test fit it I'll buy two of them!My Garage
2001 Z3 2.5i Steel Gray/Black (Lexi)
1988 325ix Diamond Schwartz/Black (Izzy)
1989 325i Cirrus Blue/Houndstooth (Stitch)
Feedback
Instagram: Stone.Hopkins
Comment
-
What about for 24v ix?How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
^ That really depends what way you're doing the 24v.My Garage
2001 Z3 2.5i Steel Gray/Black (Lexi)
1988 325ix Diamond Schwartz/Black (Izzy)
1989 325i Cirrus Blue/Houndstooth (Stitch)
Feedback
Instagram: Stone.Hopkins
Comment
-
Why does the right side hole of the near end look threaded? Hmm dunno about that, your distance from hole to edge, or 6061... how do you know if these will last vs. steel, thru holes with pins & clips, and greater hole to edge spacing??
What would Carroll Smith do? I don't trust that design for the racecar vs stock or DSSR competitionLast edited by rwh11385; 01-26-2016, 08:50 PM.
Comment
-
Originally posted by rwh11385 View PostWhy does the right side hole of the near end look threaded? Hmm dunno about that, your distance from hole to edge, or 6061... how do you know if these will last vs. steel, thru holes with pins & clips, and greater hole to edge spacing??
What would Carroll Smith do? I don't trust that design for the racecar vs stock or DSSR competition
If the bolt is indeed threaded in to the rod itself and not nutted on the outside, the force will be on one side of the threads, and eventually may pull them out of the rod.. Other wise, if it is using a nut on the outside, then it wouldn't be much of a tear out issue.
It's a great looking piece, and for a street car, seems like a decent upgrade, I would just want to see some real world feedback/data before I committed for any of the racecars.1991 325i MT2 Touring (JDM bro)
2016 Ford Flex
2011 Audi A3 - wife's other German car
Comment
Comment