Have a m20 running wasted spark with ms3x controlling the coils in pairs (A-B-C running 1-6 2-5 3-4 respectively) and injectors in batch fire. In test mode, I confirmed coils are firing in pairs as intended. Rpm signal is there, and fairly clean, and I can hear the injectors firing while cranking, but no spark. Any help?
Any place I can find some setting that are confirmed good? I have seen many. 60-2 wheel, 84 degress, falling edge, going high, using ls2 coils.
Thanks guys!
When cranking, it does not spark at all until I let off it sparks once. hmm
Any place I can find some setting that are confirmed good? I have seen many. 60-2 wheel, 84 degress, falling edge, going high, using ls2 coils.
Thanks guys!
When cranking, it does not spark at all until I let off it sparks once. hmm
Comment