Announcement

Collapse
No announcement yet.

C101 pinouts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    C101 pinouts

    Okay so I am putting a i engine from an 89 into my 85 e.

    The harness I got had the c101 cut off of it. So I ordered a c101 from an 89 but it has 9 wires left where as the engine harness only has 3 and none of the colors match anything or any pin out I have found. But the c101 does match only a couple wires are a different color

    Pin 12 is grey wire. The spare harness I had laying around is also missing the c101 but I have the connector for it. It's just missing some starter cables.

    Any idea why the engine harness is like this?

    #2
    The colors on the engine harness are
    Blue/yellow
    White/black
    Blue/white

    The c101 has
    green which is the second green from pin7
    Blue pin 10
    Grey pin 12
    Black pin 9
    White/ black pin8
    White/black pin 16
    Black/white pin 14
    Green/yellow pin 2

    Comment


      #3
      ETM will be your BFF.
      555Garage - Kingston, PA

      '13 BMW e70 X5 35d
      '95 BMW e34 525i
      '92 BMW e30 325i S52 Vert (Quade the Vert)
      '92 Range Rover Classic
      '90 Range Rover Classic
      '89 BMW e30 325i Coupe (The DIRTY30)
      '81 VW MK1 Rabbit Caddy Diesel
      '76 Honda CB550K Cafe/Brat
      '67 Pontiac LeMans
      '24 Model T Depot Hack
      ....And a bunch of Motobecane, Puch, Garelli, Batavus and Honda 49cc-78cc Mopeds...

      Comment

      Working...
      X