Announcement

Collapse
No announcement yet.

pressure plate to flywheels bolts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    pressure plate to flywheels bolts

    So I managed to strip a few of the pressure plate bolts with an improperly sized allen key. I found the part number on real oem, but pelican and ecs tuning want way to much money for a small bolt. Can I get these at a hardware store, or are they somehow special?

    Thanks

    #2
    Not sure if those are 8.8 or higher but I would think as long as they are the correct grade you should be fine.
    Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

    https://www.r3vlimited.com/board/sho...86#post4944786
    Alice the Time Capsule
    http://www.r3vlimited.com/board/showthread.php?t=360504
    87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

    Comment


      #3
      Aren't these specific torque to yield bolts?
      sigpic
      Gun control means using both hands
      Sex, Drugs, Rock 'n roll. Pick two.

      Comment


        #4
        Not the ones holding the pressure plate to the flywheel. They are small M8 cap head machine screws.

        I wouldn't hesitate to get some from the hardware store. Like Jeff said, just get the same grade and you will be fine.

        Looking closely at the picture FCP Euro has on their website, it is an 8.8 grade.

        Comment


          #5
          :up:
          Perfect, Thanks guys!

          Comment

          Working...
          X