Hey guys,
I've just completed swapping in my '95 M50B25TU (and it starts just fine), the only thing I have left is locating the o2 sensor socket.
I'm positive there's no o2 sensor present on the engine and I'm under the impression that the socket for the plug should be placed in the holder found on the tranny.
My engine and gearbox came separate so the socket was not to be found on the gearbox. The harness on the engine was all connected up though. All I need to do now is pin point the location of the socket itself but I have no idea where it should pass through besides going through the harness box under the intake manifold. Pin 70 and 71 on the DME are connected and all the relay wires seem to be all in place. I'm lost at this point.
I've just completed swapping in my '95 M50B25TU (and it starts just fine), the only thing I have left is locating the o2 sensor socket.
I'm positive there's no o2 sensor present on the engine and I'm under the impression that the socket for the plug should be placed in the holder found on the tranny.
My engine and gearbox came separate so the socket was not to be found on the gearbox. The harness on the engine was all connected up though. All I need to do now is pin point the location of the socket itself but I have no idea where it should pass through besides going through the harness box under the intake manifold. Pin 70 and 71 on the DME are connected and all the relay wires seem to be all in place. I'm lost at this point.
Comment