Is this the Stock fan wiring? It's three wires, brown, blue black, and black green..not sure what to do cause it's not what OP said
Announcement
Collapse
No announcement yet.
Official Electric Fan wiring thread!
Collapse
X
-
Ah i see what i did. fail.
But yes thats the plug.
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by 328ijunkie View PostAh i see what i did. fail.
But yes thats the plug.
As for the temp switch side, I just splice the black and brown, and wire the green into it correct?Originally posted by TSI♫ Rust flecks are falling on my head...♫OEM+
Comment
-
BK/Blue is high speed +12 and brn is ground yes.
And as for the temp switch, yes assuming you have a fan switch between them.
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by 328ijunkie View PostBK/Blue is high speed +12 and brn is ground yes.
And as for the temp switch, yes assuming you have a fan switch between them.
Sorry for being so lost. I can wire an M50 but I can't figure this out, go figure haha.Originally posted by TSI♫ Rust flecks are falling on my head...♫OEM+
Comment
-
Good to hear!
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Wired it up as per OP's instructions, still nothing. I got to get this fan working cause my coolant cap keeps bursting over, it's 98* outside and my E30 will have none of it. Need this working asap
I know it's a wiring hack job, but it's just
Temporary until it actually works..Originally posted by TSI♫ Rust flecks are falling on my head...♫OEM+
Comment
-
Originally posted by giantkeeper View PostLOL, faulty brand new temp switch - talk about chasing your tail.
Thanks Dave and Erik for your help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Originally posted by lolcantturn View PostThat temp switch is also new
I need this fan to work today, I'm going on a road trip with friends and this heat is going to devour my car. Just need it to work some way or some how
Erik
Comment
-
Lol I'm a noob. Got an old switch and put it in as a blank on my dash, wired up the fan to it with a 30amp fuse in line. It feels terrible and looks terrible but it's all I need for this trip cause this road is all traffic. ordered a new temp switch for when I come back.Originally posted by TSI♫ Rust flecks are falling on my head...♫OEM+
Comment
-
Originally posted by lolcantturn View PostLol I'm a noob. Got an old switch and put it in as a blank on my dash, wired up the fan to it with a 30amp fuse in line. It feels terrible and looks terrible but it's all I need for this trip cause this road is all traffic. ordered a new temp switch for when I come back.
JMHO
Comment
-
Originally posted by bimmerteck View PostWiring a load as large as a fan directly to a switch often ends in a massive fail. The better idea is to leave the unfinished car in the garage and ride with a friend. Come back from the trip and fix it correctly.
JMHOOriginally posted by TSI♫ Rust flecks are falling on my head...♫OEM+
Comment
Comment