Announcement

Collapse
No announcement yet.

Koni SA install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Koni SA install

    I have started to install the front Konis and have found using the stock rebound there is only about 1-1/4" between the top of the rebound and the upper spring plate is this the way it should be ?the koni Shock extended is about the same height as the original HD's and the rebound is approx 4" as is stock ,seems as though there is not much room for the shock to compress before it touches the rebound

    #2
    No answers after searching for hours ,is the stock approx 5" BMW bump stop too tall to use with the koni SA?

    Comment

    Working...
    X