Announcement

Collapse
No announcement yet.

No teeth on a brand new e30 wiper arm?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No teeth on a brand new e30 wiper arm?

    My driver side wiper didn't work, and I found out that there is no teeth on the driver side wiper arm (The wiper motor is still working).

    So I bought a new driver side wiper arm and I thought the factory wiper arm would have some teeth. However, the one that came in doesn't have any.
    Here is the picture of the new wiper arm.


    Is this normal?
    Last edited by bluevanilla; 09-07-2016, 09:26 PM. Reason: The image link didn't work

    #2
    Yes it's normal. The arm is deliberately softer than the spindle so it will strip before the spindle. When you first tighten the nutnthe spline will cut in to the arm so make sure it's aligned before you start tightening
    Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

    https://www.r3vlimited.com/board/sho...86#post4944786
    Alice the Time Capsule
    http://www.r3vlimited.com/board/showthread.php?t=360504
    87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

    Comment


      #3
      Thanks a lot. My wiper is working again just in time for the rainy reason in Seattle.

      Comment

      Working...
      X