Announcement

Collapse
No announcement yet.

Wasted spark mspnp2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wasted spark mspnp2

    Hello

    I want to install wasted spark on my Bmw m20 engine in my e30.
    Ive moved the optional jumpers arround.
    I took the one from aircondition idle, because my car dont have A/C
    And the launch clutch switch because i dont intend to use launch control.

    Moved them down to the ws spots.

    Now my question is, now that it is done do i still need quadspark or any other ignition module to run my Bosch 3x2 coil pack ?
    Don't hang with your head, if you stand in a pile of shit :neutral:

    #2
    Ive copied this over from another post i made.

    If you bought the MSPNP2 that has the provision for waste spark install but without the ignition drivers, you must use an ignition driver such as the quad spark. From there its as simple as wiring the quad spark into the megasquirt, getting a GMDIS plate and rewiring the internals for the coils and wire the quadspark to the GMDIS board. I wired mine in last year and it took probably 3 hours from start to finish.

    From there all you need to run the car is a CPS and changing the settings in megasquirt for waste spark. I run 3.0ms dwell and 1.0ms spark duration and have no spark blowout with bpr7es at 0.025" at 14 lbs of boost.

    Comment

    Working...
    X