Announcement

Collapse
No announcement yet.

E30 M52b28 turbo build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    E30 M52b28 turbo build

    Okay guess its getting to the point on my build where mainfold is getting needed. Any recommendations of a good not over priced mainfold. Or anyone have one forsale?;)

    #2
    From research, they're tricky to make/do correctly due to the wider DOHC m50. If I were in your boat, I'd save up the $500 to get a properly made one by rapid spool which has been suggested by many members. Worry free, quality product.

    I'm about 50% done my turbo m20 build/install and what I've learnt is getting quality products off the bat, saves a lot of headache and most of the time money in the end. Go with the one listed below!

    I'm sorry I can't provide first hand experience with it, doesn't seem like many people are wanting to or able to provide much assistance in this topic as my question below yours has gone days without any help.

    2016 F-150
    1987 Royalblau 325es B25 turbocharged

    Build thread here: http://www.r3vlimited.com/board/showthread.php?t=405594

    Comment


      #3
      Yeah they have good stuff, I've been in contact with them but I was just looking around. Yeah I had a built m20 I sold a while back because I decided to change platforms ll. Excited to get her done tho. Hoping someone is selling a used on haha.

      Comment


        #4
        Ahh nice, good luck, hopefully you can find one!
        2016 F-150
        1987 Royalblau 325es B25 turbocharged

        Build thread here: http://www.r3vlimited.com/board/showthread.php?t=405594

        Comment


          #5
          Originally posted by E30-Ellerman View Post
          From research, they're tricky to make/do correctly due to the wider DOHC m50. If I were in your boat, I'd save up the $500 to get a properly made one by rapid spool which has been suggested by many members. Worry free, quality product.

          I'm about 50% done my turbo m20 build/install and what I've learnt is getting quality products off the bat, saves a lot of headache and most of the time money in the end. Go with the one listed below!

          I'm sorry I can't provide first hand experience with it, doesn't seem like many people are wanting to or able to provide much assistance in this topic as my question below yours has gone days without any help.

          http://www.rapidspoolindustries.com/ordering
          Thanks for plug, manifold pricing has been updated on our website.
          We've added the E36 top mount to our line up and will be adding some more turbo accessories.
          Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
          ____________________________
          E-mail Panayiotisx2@gmail.com
          Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL

          Comment


            #6
            subbed as ill be boosting my 2.8 soon also

            Comment


              #7
              Subbed

              Also subbed as I will join the boosted club in a few months also.

              :popcorn:

              Comment


                #8
                Check out my build thread in my Sig. All done with rsi manifold
                RHD OBD2 M50b25 turbo build thread:
                http://www.r3vlimited.com/board/showthread.php?t=384800

                Comment


                  #9
                  be ware that the 24V e30 RSI mani , creeps boost
                  Last edited by JOMARO; 08-28-2017, 09:09 PM.

                  Comment


                    #10
                    Originally posted by JOMARO View Post
                    be ware that the 24V e30 RSI mani , creeps boost
                    Its fine if you run over 20psi ;)
                    RHD OBD2 M50b25 turbo build thread:
                    http://www.r3vlimited.com/board/showthread.php?t=384800

                    Comment


                      #11
                      Originally posted by JOMARO View Post
                      be ware that the 24V e30 RSI mani , creeps boost
                      How would boost creep from a manifold? Maybe if your wastegate isn't working properly I could see that...

                      Comment


                        #12
                        I can also confirm that it creeps significantly, wg tube is positioned horribly. needs to be modified

                        Comment


                          #13
                          Originally posted by haaken675 View Post
                          How would boost creep from a manifold? Maybe if your wastegate isn't working properly I could see that...
                          WG placement on the manifold is mostly to blame. Given the lack of space, it's the only real way to add a wastegate to the manifold.

                          That said, you could block off the manifold's WG port and install the wastegate on the turbine housing and that would solve everything, but not everyone wants to cut/weld their shiny new turbine housing, and then possibly do it again if they change turbos.

                          at 12psi on an S257, I haven't had creep yet. If that changes, I'll probably do this mod.
                          Last edited by Northern; 09-20-2017, 03:56 PM.
                          Originally posted by priapism
                          My girl don't know shit, but she bakes a mean cupcake.
                          Originally posted by shameson
                          Usually it's best not to know how much money you have into your e30

                          Comment

                          Working...
                          X