I would like to swap a 3.25 or 3.23 ring and pinion into my med case 3.73 LSD. My question is are nearly all 188mm r and p's created equal? I'm assuming I have 12mm bolts holding my ring to the carrier. The 3.23 is 14mm correct? So unless I plan on drilling out my carrier (just joking) I can't use the 3.23 right?
Announcement
Collapse
No announcement yet.
188mm ring and pinion question
Collapse
X
-
The change in offset for carrier caps is between 3.07/3.15.
Anything 188mm on the same side of that split should be interchangeable, save new stuff with welded ring gears and other witchcraft.
Most likely will require new shims too.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30
Comment
-
I found and open 3.25 to swap the carrier to. I'm figuring that will be easier than re setting pinion depth etc. I think I'll prob do a fresh up while in there.You say "Where are your other two cylinders?"
I say "Where's your other camshaft?"
Frankenmotor: if an M42, M44, M20, S50, and S52 were to have a kid.
Comment
Comment