Announcement

Collapse
No announcement yet.

Misc. s38b36 technical questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Misc. s38b36 technical questions

    Quick question for you guys. When i put my idler sprocket in (part 13) I put it back with the long end facing toward the front of the engine and the flat end toward the back. Looking back on an old picture i have it the other way and Im just trying to confirm that I don't have it reversed before starting this thing.
    Also where does hose 13 go after it comes off the plenum?
    Last edited by ttrousdell; 05-20-2013, 11:00 AM.

    The Build:
    http://www.r3vlimited.com/board/showthread.php?t=191125

    #2
    Are the getrag 280 and 260-6 transmissions the same length? Would like to be able to use the same driveshaft when swapping them over.

    The Build:
    http://www.r3vlimited.com/board/showthread.php?t=191125

    Comment


      #3
      Flat end of the sprocket goes towards the front of the cylinder head. Long end towards the rear.

      Hose #13 goes to the dipstick. It's the oil return line for the oil separator (#4) on the bottom on the intake manifold, so oil goes into the oil pan instead of getting burned in the engine. :)

      Comment

      Working...
      X