Originally posted by pawi30
View Post
Announcement
Collapse
No announcement yet.
iX skid plate
Collapse
X
-
Custom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
-
pictures/ pattern? if these are a good design, the guys on e30tech will be very excited.
Shipping to Canada k0l2h0?
edit: used my head and looked in your sig88 325 IX DiamantSchwarz - TOURING - waiting...
89 325 IX AlpinWeiß - Gone
88 325 IX DiamantSchwarz - Parted
89 325 IX RoyalBlau - Parted
88 325 IX RoyalBlau - Gone
88 325 IX DiamantSchwarz - Parted
Comment
-
Here is the iX plate that Eric test fitted on my car. These have been resized.
The front crossmember is above the pad of the jack. The plate sits very close to the crossmember, and flexes to touch it when you place the jack there.
I removed the plastic splash shield from the front because I couldn't figure out any other way to get at the back side of those 7 bolts in the front to tighten them.
And yes, I know my front diff is leaky....
[ATTACH]20096[/ATTACH]
Last edited by JeremyL; 06-09-2009, 10:56 PM.
Comment
-
I have two left if any one wants one.Custom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
Bumping this because I'm interested in a skid plate that protects the oil pan for my rallyx ix.
Anyone build anything custom/good? I am thinking something along the lines of a hik fabrication hoop with a plate that extends from the front valence to beyond the oil pan. Attaching to the front subframe with spacers is a possibility, since it'd be a rather long plate. I'm thinking metal stand offs or a hockey puck.
My real issue is where to attach the plate in the rear? Thoughts?
AWD > RWD
Comment
-
Originally posted by Kershaw View PostBumping this because I'm interested in a skid plate that protects the oil pan for my rallyx ix.
Anyone build anything custom/good? I am thinking something along the lines of a hik fabrication hoop with a plate that extends from the front valence to beyond the oil pan. Attaching to the front subframe with spacers is a possibility, since it'd be a rather long plate. I'm thinking metal stand offs or a hockey puck.
My real issue is where to attach the plate in the rear? Thoughts?
Last edited by Chrisbike; 04-25-2017, 07:29 PM.Build Thread
https://www.r3vlimited.com/board/sho...d.php?t=419655
Parts Thread
https://www.r3vlimited.com/board/sho...d.php?t=408302
Comment
-
Build Thread
https://www.r3vlimited.com/board/sho...d.php?t=419655
Parts Thread
https://www.r3vlimited.com/board/sho...d.php?t=408302
Comment
-
actually, i made one out of an old aluminium sign i had at work, its pretty thick, i drilled and tapped the bosses in the bottom of the subframe. it doesnt cover the whole oil pan but i would imagine as long as it protects the front edge of the pan it would take care of most things, ill see if i can find a picture of it and post it
Comment
Comment