Announcement

Collapse
No announcement yet.

Megasquirt car wont start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Megasquirt car wont start

    So i finally got my megasquirt connected to the computer; however, the car will not start. It keeps just turning over.

    I am using a DIYPNP ms2 built by SSSquid. I have tried a handful of different tunes, but nothing is working. I will post logs in a little bit.

    Please help.

    Thanks
    1987 325is 2.8L Stroker Turbo "Little Pickle aka The Green Turbo Sled"

    #2
    You need to figure out why its not firing. Start with the basics, fuel, spark and timing.

    Got fuel? injectors ticking? Getting any spark? if so have you confirmed ignition timing with a timing light?

    Comment


      #3
      Originally posted by e30davie View Post
      You need to figure out why its not firing. Start with the basics, fuel, spark and timing.

      Got fuel? injectors ticking? Getting any spark? if so have you confirmed ignition timing with a timing light?
      Got fuel, plugs were wet when I pulled them.

      Got spark. https://youtu.be/s-fK-WF-_4g
      1987 325is 2.8L Stroker Turbo "Little Pickle aka The Green Turbo Sled"

      Comment


        #4
        Got it started. Went with another base map.
        1987 325is 2.8L Stroker Turbo "Little Pickle aka The Green Turbo Sled"

        Comment


          #5
          Working on a road tune now, with the help of sssquid. Thanks yall
          1987 325is 2.8L Stroker Turbo "Little Pickle aka The Green Turbo Sled"

          Comment

          Working...
          X