Announcement

Collapse
No announcement yet.

m10 intake manifold / tb question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    m10 intake manifold / tb question

    I recently replaced the intake boot and the breather hose from the tb to the valve cover and should have tried removing the tb to clean it from the manifold/replace the gasket etc.

    Is it possible to remove it and more importantly install it back w/o removing the intake manifold/fuel rail etc from the head ?
    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

    #2
    small hands, then yes, remove the support bracket first(for the intake manifold)

    i belive the bolts on there are 8mm head

    Comment


      #3
      Originally posted by Mr Deagle View Post
      small hands, then yes, remove the support bracket first(for the intake manifold)

      i belive the bolts on there are 8mm head
      10mm. Long extension, 1/4" ratchet and small hands.
      Current:

      BMW 320i 2d 2.0 m20 -88
      BMW 325i Cabriolet 2.5 m50 -88
      BMW 316i touring 1.6 m40 -90
      BMW 320i 4d 2,2 m54 -01

      Comment


        #4
        Sounds good.
        Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



        OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

        Comment

        Working...
        X