s14 block, 500 usd on s14.net
Announcement
Collapse
No announcement yet.
m10 thread
Collapse
X
-
Not bad, but since I am a n00b when it comes to engine rebuilds I am going to stick with a simple and cheap m10 for my first try ;)Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
ok since this is an m10 thread i ll jump in.. i just swapped an m10 out of a 85 4 dr auto into my 2dr 5sp 84..the problem is everythings ready to go except for the vacuum hoses and fuel lines..grounds..etc.. the motor that was in there had one type of injection..or whatever..not really sure what the difference between the two is but the motor that was in my 318 had a gold fuel rail with two outlets for hoses....the one that came on the motor is a black fuel rail with only one outlet..so i figured the easiest thing to do would be to switch em.. and put the gold one and the injectors onto the motor with the black one..seeing as how the harness in my car was already for the gold fuel rail..(sorry about vagueness i know theres two types i just don t know which is which) so now i have a mess of lines that i don t know what to do with and i can t find vacuum hose diagrams anywhere..not in a haynes..or a chilton/.. they got the 2.0 liter 4 cyl but not the 1.8..if anybody could help out or point me in the right direction that would be great this car has taken forever and now i m almost there and i feel dumb to be stopped by such a stupid complication... any help is great..thanks
Comment
-
Picked up a clean 318i head today, off to an engine shop to make sure it's straight etc before doing anything else.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
the third hole on the fuel rail that you are talking about goes to the cold start injector (if that helps at all)
http://shark.armchair.mb.ca/~dave/BMW/e30/
Comment
-
Originally posted by Mr Deagle View Postthe third hole on the fuel rail that you are talking about goes to the cold start injector (if that helps at all)
http://shark.armchair.mb.ca/~dave/BMW/e30/
On all 318i l-jets I've seen cold start valve has t juntion on fuel hose, not on fuel rail.Current:
BMW 320i 2d 2.0 m20 -88
BMW 325i Cabriolet 2.5 m50 -88
BMW 316i touring 1.6 m40 -90
BMW 320i 4d 2,2 m54 -01
Comment
-
My $30 head, how does it's condition look to the experts ? I am starting to take it apart so I can have it blasted (since it's aluminum it shouldn't be chemically washed right?)
More and bigger size pictures uploaded here http://www.briangt.com/gallery/album39?page=1
Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Originally posted by Mr Deagle View Postthe light spots are for the krufleger or w/e injection (cis i think), or you could put nitrous injectors in there
Kugelfischer, a pump fed mechanical cis
or
Bosch k-jetronic airflow controlled mechanical cis.
Both have injector holes in head(ok not all k-jets).
If I see right, head says 1,8 so it must be k-jet, since Kugelfischer was never available to 1,8l m10.
Jean, chances are that you have cc as mirror image to your piston top, since that seems to be vintage head.Current:
BMW 320i 2d 2.0 m20 -88
BMW 325i Cabriolet 2.5 m50 -88
BMW 316i touring 1.6 m40 -90
BMW 320i 4d 2,2 m54 -01
Comment
Comment