https://www.amazon.com/Aeroquip-FCN1...ywords=fcn1003
Order that.
Remove fittings from oil filter housing
Remove oil cooler from front of car
Do NOT attempt to remove fittings from oil cooler itself
Use hacksaw or wizzer wheel to cut crimped clamps and make sure not to nick the steel line.
pull old hose off of steel and measure it out on the new hose, cut to length and use wide stainless hose clamps to secure it.
the o rings for the oil filter housing are 13.4mm x 1.78mm
Order that.
Remove fittings from oil filter housing
Remove oil cooler from front of car
Do NOT attempt to remove fittings from oil cooler itself
Use hacksaw or wizzer wheel to cut crimped clamps and make sure not to nick the steel line.
pull old hose off of steel and measure it out on the new hose, cut to length and use wide stainless hose clamps to secure it.
the o rings for the oil filter housing are 13.4mm x 1.78mm
Comment