Hello guys.
I have already read every forum that i could find but i couldnt find a solution for my problem.
I am having an electrical trouble and the engune won't run. I have no pulse on injectors.
The car is a 1982 318i e30, it had a running 325i engine in it, decided to swap that engine for an m30 so i am using an m30b34 engine with an m30b35 harness.
I installed the engine and the harness. I cranked the engine, i have fuel on the rail and spark but no pulse on injectors. I changed the ecu with another one from a running car and still no pulse. A replaced the crank position sensor with a brand new one and the problem persists.(note that the engine came with 2 sensors on the trans but with the new harness had to install a CPS from a 325i engine on the crankshaft pulley an for the sensor to fit an not hit the pulley i had to use a nut to provide sufficient space).
This problem is driving me nuts. I traced the wires of the harness and everything is good, i cant figure out what could be causing the problem.
Any help would be appreciated and thank you in advance
I have already read every forum that i could find but i couldnt find a solution for my problem.
I am having an electrical trouble and the engune won't run. I have no pulse on injectors.
The car is a 1982 318i e30, it had a running 325i engine in it, decided to swap that engine for an m30 so i am using an m30b34 engine with an m30b35 harness.
I installed the engine and the harness. I cranked the engine, i have fuel on the rail and spark but no pulse on injectors. I changed the ecu with another one from a running car and still no pulse. A replaced the crank position sensor with a brand new one and the problem persists.(note that the engine came with 2 sensors on the trans but with the new harness had to install a CPS from a 325i engine on the crankshaft pulley an for the sensor to fit an not hit the pulley i had to use a nut to provide sufficient space).
This problem is driving me nuts. I traced the wires of the harness and everything is good, i cant figure out what could be causing the problem.
Any help would be appreciated and thank you in advance
Comment