Announcement

Collapse
No announcement yet.

BBS Garage: All things BBS

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by micvin View Post
    I got a question. You selling?
    $ 1,200 + s/h from 96821 link ... http://www.r3vlimited.com/board/showthread.php?t=240242





    Last edited by fporro; 03-08-2012, 05:09 PM.

    Comment


      Originally posted by Zasz View Post
      Yeah, I'm thinking of 15x8 front and 15x9 rear just for shits & giggles.

      Do you think the ET38 will have issues with clearing the shock / brakes without a spacer? I have the 5mm spacers already, so that'd bring the offset to ET33 (closer to bottlecap fitment).

      Also, I'm unable to seperate the parts of the wheel because of whatever sealant BBS used, and my oven is too small to stick the wheel in to loosen it up. Any pointers?
      If you cant get the wheels apart with a mallet...

      Cut the seal with a razor, all the way around (should do this anyway), and use a heat gun around the entire seam. Do it for a few minutes, and the halves should split quite easily...

      Comment


        Originally posted by formula driver View Post
        If you cant get the wheels apart with a mallet...

        Cut the seal with a razor, all the way around (should do this anyway), and use a heat gun around the entire seam. Do it for a few minutes, and the halves should split quite easily...
        No heatgun required. A hammer and two blocks of wood are needed, and it takes a few seconds:

        Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

        Comment


          Actually, the issue with mine was that the .5" lip was a pain to separate from the faces because I didn't have enough room to get the seal with a razor, I was just cutting the very edge of the sealant. I could tell the lip was able to budge with the mallet, but I didn't get enough leverage somehow.

          All I ended up doing was prying the lips off with a large flathead screwdriver, worked like a charm.

          Edit: Somehow, even a blowtorch didn't work.
          ///Z

          1988 BMW 325 Super Eta - Elsa

          "i"CONVERSIONWARchip&3.0MAF3.73LSDBBSRSsSMILIES"is"SPOILER+LIPHOUNDSTOOTHSHORTSHIFTERPLASTICBUMPERCONVERSIONEtc.



          Sell Me Your SCHWARZ FENDERS!

          Originally posted by chadthestampede
          ^ Nothing you post makes any sense.

          Comment


            Originally posted by hexagone View Post
            No heatgun required. A hammer and two blocks of wood are needed, and it takes a few seconds:

            http://www.youtube.com/watch?v=44yMeoGsLcg
            Do you know EVERYTHING bro?

            I use a hammer before I use any heat, and sometimes it works (most of the time) if not, than I use a heatgun, and then they split apart, quite easily.

            While your here hex, Ill voice a warning for others. Steer clear of this guy, folks, he burnt me BADDDD on a set of rs285's...

            Price was not horrible, and he offered a refund, but the issue was that he was VERY dishonest about how he described them.

            Let me know if you'd like to see the pics of these things...

            I dont like you dude, Im trying to be an adult about this whole thing, but do me a favor, and dont quote my post's. It just reminds me of how pissed I am, and how bad you SUCK.

            Comment


              ^^^ relax bro..
              - Fercy -

              BimmerHeads
              Classic BMW Specialists
              Santa Clarita, CA
              www.BimmerHeads.com

              Comment


                Originally posted by formula driver View Post
                Do you know EVERYTHING bro?

                I use a hammer before I use any heat, and sometimes it works (most of the time) if not, than I use a heatgun, and then they split apart, quite easily.

                While your here hex, Ill voice a warning for others. Steer clear of this guy, folks, he burnt me BADDDD on a set of rs285's...

                Price was not horrible, and he offered a refund, but the issue was that he was VERY dishonest about how he described them.

                Let me know if you'd like to see the pics of these things...

                I dont like you dude, Im trying to be an adult about this whole thing, but do me a favor, and dont quote my post's. It just reminds me of how pissed I am, and how bad you SUCK.
                This isn't adult behavior. You're acting childish and i'm going to quote you again because you look like a fool posting this drivel.

                For anyone so absolutely curious what this nonsense is about, please refer to this thread below:

                Comment


                  Originally posted by e30lyf View Post
                  ^^^ relax bro..
                  no...

                  Originally posted by hexagone View Post
                  This isn't adult behavior. You're acting childish and i'm going to quote you again because you look like a fool posting this drivel.

                  For anyone so absolutely curious what this nonsense is about, please refer to this thread below:

                  http://www.s14.net/forums/showthread.php?t=54675
                  Your right, and I agree, but its VERY hard to act like an adult, when I have punk kids like you screwing me over on wheel purchases, and than prancing around the net, quoting my post's like nothing happened.

                  And you keep doing everything you can to make me look bad, thats your defense.

                  I dont like you Asim, I feel that you burned me pretty bad, now do me a favor and dont quote my gd posts, stay out of my hair, and Ill stay out of yours.

                  Comment


                    Anyone know anything about BBS rs 601?
                    34 bolts
                    4x100
                    16x7.5 I think.

                    Can't find much info on them.

                    Comment


                      really really proud of these!

                      But man Im sore...

                      BBS RF 011/004

                      17x9 et7 17x10 et15

                      Prima Donna theme

                      80% gloss white powdered faces/waffles
                      24k gold painted hex caps
                      24k gold plated bolts
                      Gloss black powdered inner barrels
                      Semi gloss powdered nuts
                      Red/Gold JDM BBS caps
                      Mirror polished Newish 2.5"/3" stepped lips



                      Comment


                        ^EWWWWW!!! how much?

                        Comment


                          Found a couple sets of 1/4 caps guy wants around $11- for each set, but need refinishing. Not a big deal as they would have to be done to match wheels anyway. How rare are these and does that sound like a fair price?

                          Pics of what he sent

                          Last edited by Court M3; 03-21-2012, 02:26 AM.
                          Continuous For Sale Thread
                          323i s50

                          Comment


                            They always come handy, specially if you're into RS's.
                            $ 11 very fair.

                            I need a set of 4 for my RS033's.

                            Comment


                              It's more like 1/2 height caps of BBS RG and I dont think those fit RS. Ask for a photo of the back of it to confirm.
                              sigpic

                              Comment


                                Want to buy BBS E52 center, preferably PCD 5x130 but will take any PCD's. Hit my inbox if you wanna let go. Thanks :)

                                Pic:
                                Last edited by kreasims; 03-21-2012, 03:45 AM.
                                sigpic

                                Comment

                                Working...
                                X