Announcement

Collapse
No announcement yet.

BBS Garage: All things BBS

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by M-technik-3 View Post
    Very odd seat, most likely made by another manufacturer for them, looks like a late 90's design. Have you sent a message to BBS? They might have an answer.
    It's made by Bertrand Faure for BBS. I see that its the same as in the E34 "Enduro" concept car.



    The guy I got them from said that they were from some concept E30 or E34.
    They are a bit big for the E30, but amazingly comfortable.
    '91 E30 316i
    '97 Rover Mini 1275

    Comment


      Help with offsets?

      Can anyone help me understand the offsets of my wheels? There must be something obvious that I am missing here.

      I purchased a set of four 16" BBS RS from another member:

      2x BBS RS 005 - original specs 16x7 ET11
      2x BBS RS 061 - original specs 16x8 ET20


      The way I would expect to run these would be the 005 in the front, and the 061 in the rear. HOWEVER, here's where it gets tricky. The PO of these wheels replaced all four barrels with the same size - effectively making them 16x7.5 all around. No changes to the lips.

      So my questions are:
      -How do I calculate the effective offsets for these wheels after these changes?
      -Which pair should I run in the front & rear?

      Thanks in advance all These are on what will eventually be my E30 M3 cabriolet replica.
      '89 Schwarz E30 M3 Cabriolet Build

      Comment


        BBS Garage: All things BBS

        When you say replaced all four with the same size, you are not being very specific. All same size meaning the front and back have the same size barrels or the same as oem? Either way any increase or decrease in barrel size without altering lip and hub will increase or decrease et 6.5mm positively or negatively for every half inch I hope this helps.


        Sent from my iPhone using Tapatalk
        FEEDBACK:
        http://www.r3vlimited.com/board/showthread.php?t=316212

        BMWCCA #398608
        IG @yagayo38

        "The Best E30's were built with two camshafts four cylinders and sixteen valves!".

        Comment


          Originally posted by getouth View Post
          When you say replaced all four with the same size, you are not being very specific. All same size meaning the front and back have the same size barrels or the same as oem?
          Sorry, what I meant to say is that they were replaced with four identical barrels - I don't know what size barrels, but the total width of all four wheels is now 7.5"

          Originally posted by getouth View Post
          Either way any increase or decrease in barrel size without altering lip and hub will increase or decrease et 6.5mm positively or negatively for every half inch I hope this helps.
          That is very helpful, thank you! The 005s were increased by a half inch, so would that mean instead of 11mm offset they are now 17.5mm?
          '89 Schwarz E30 M3 Cabriolet Build

          Comment


            The opposite actually, when you increase the width you decrease the et/offset. So it would actually be 3.5


            Sent from my iPhone using Tapatalk
            FEEDBACK:
            http://www.r3vlimited.com/board/showthread.php?t=316212

            BMWCCA #398608
            IG @yagayo38

            "The Best E30's were built with two camshafts four cylinders and sixteen valves!".

            Comment


              BBS Garage: All things BBS

              [emoji6]


              Sent from my iPhone using Tapatalk
              Last edited by getouth; 09-23-2017, 11:04 PM.
              FEEDBACK:
              http://www.r3vlimited.com/board/showthread.php?t=316212

              BMWCCA #398608
              IG @yagayo38

              "The Best E30's were built with two camshafts four cylinders and sixteen valves!".

              Comment


                Will this require spacers to clear the caliper?
                front: bbs rs 039 16x7 et24
                rear: bbs rs 040 16x8 et24

                Comment


                  Anyone have a line on part #09.23.221 or part #56.24.079 center caps for BBS RZ378?
                  1991 318is Brillantrot daily driver (slow restoration)

                  Comment


                    Originally posted by c0rbin9 View Post
                    Anyone have a line on part #09.23.221 or part #56.24.079 center caps for BBS RZ378?
                    Why not ebay?

                    Comment


                      Anyone have pics of RS001 16x7.5 mounted? Im in the mood for some BBS porn pls share!
                      [/SIGPIC]

                      Comment


                        Originally posted by EfrenFlores View Post
                        Anyone have pics of RS001 16x7.5 mounted? Im in the mood for some BBS porn pls share!
                        RS001
                        16x8 ET14
                        16x9 ET14

                        Lower in the front now.
                        Attached Files
                        Last edited by Mike36; 12-01-2017, 11:14 AM.
                        sigpic

                        Comment


                          Originally posted by Mike36 View Post
                          RS001
                          16x8
                          16x9

                          Lower in the front now.
                          Gorgeous
                          How did you get 16x8 to work in front without poke?what ET?
                          Last edited by bradnic; 12-01-2017, 06:28 AM.
                          I BUY/SELL REFURBISHED CM5907s & CM5908s

                          HOWTOs:
                          DB vert plastic bumpers
                          OEM Keys
                          MTech1 docs

                          88 ix Lach/Card
                          91 ic Calypso 3.1
                          86 Cosmo 2.7

                          OEM+ or bust!


                          reelizmpro: I will always be an e30 guy.. I still do all of my own labor
                          TrentW: There's just something so right about a well-built M20 in an E30
                          e30m3s54turbo: I save my money for tuner parts.

                          Comment


                            Originally posted by bradnic View Post
                            Gorgeous
                            How did you get 16x8 to work in front without poke?what ET?
                            ET14 both front and rear. Fits perfect without any poke ;D
                            sigpic

                            Comment


                              NICE. more pics please.
                              closeups?
                              please
                              please
                              I BUY/SELL REFURBISHED CM5907s & CM5908s

                              HOWTOs:
                              DB vert plastic bumpers
                              OEM Keys
                              MTech1 docs

                              88 ix Lach/Card
                              91 ic Calypso 3.1
                              86 Cosmo 2.7

                              OEM+ or bust!


                              reelizmpro: I will always be an e30 guy.. I still do all of my own labor
                              TrentW: There's just something so right about a well-built M20 in an E30
                              e30m3s54turbo: I save my money for tuner parts.

                              Comment


                                Originally posted by bradnic View Post
                                NICE. more pics please.
                                closeups?
                                please
                                please
                                Attached Files
                                sigpic

                                Comment

                                Working...
                                X