Let me start off by saying I'm not thaaat mechanically inclined, most of this was figured out through process of elimination. "If it doesn't fit here, it must fit there..." and back tracking my old HID kit. A few people have requested photo's and a write up of Ary's Smileys. So here it is.
Materials Used:
-Power drill
-7/8ths drill bit
-Reamer bit
-6 pack of Great White
-Phillips Screw Driver
Materials Used:
-Power drill
-7/8ths drill bit
-Reamer bit
-6 pack of Great White
-Phillips Screw Driver