Announcement

Collapse
No announcement yet.

Incessant coolant light, tested everything, any tips?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Incessant coolant light, tested everything, any tips?

    Hi all,

    I've been trying to get my coolant light to shut off, but it just doesn't want to.

    First, I checked that the coolant level was correct. That wasn't the issue.

    I installed a new coolant level sensor, which was fully functional before I installed it. That didn't solve the problem.

    I checked the pigtail connector for power, which read 12 Volts on my multimeter, that wasn't the issue.

    I checked the coolant level sensor for continuity, which it has, so that isn't the issue.


    What do you all think I should do?

    Thanks!
    1991 325i 4 dr Euro Spec, 5 Speed, 4.10 LSD, Slicktop

    #2
    Pull the cluster and remove the bulb.
    AWD > RWD

    Comment


      #3
      Originally posted by Kershaw View Post
      Pull the cluster and remove the bulb.
      Actually, that's a good idea...

      EDIT: Maybe not. The "CHECK" light will flash every start.
      Last edited by Sail Boat; 02-02-2017, 12:56 PM.
      1991 325i 4 dr Euro Spec, 5 Speed, 4.10 LSD, Slicktop

      Comment

      Working...
      X