EDIT: collected everything I needed, Thank you to anyone who reached out!
Collecting parts for my turbo project.. my goal is to have all my parts collected by December and have the car up and running by spring. Anything I can find used or source from other R3v members would be a huge help, so I thought I'd just put up a wanted list and keep it updated for the following months. Obviously alot of this stuff I can buy new and might end up doing so, but things like an intercooler and Charge pipping already the right size to fit an e30 frame would save me alot of time on the backend! Message me if you anything you want to get rid of.
Things I Need List:
Things I already picked up:
Garrett 57trim t3/t4
GoodNtight Turbo manifold
18x12x3 Intercooler
Charge piping + couplers
LC-2 Wideband
wyntonm BOV
Wyntonm 44mm Wastegate
Bosch 42lb EV1 injectors
MegasquirtPRO PNP
ARP Headstuds
VDO Gauges and pod's set up
2.93 LSD
AN4 Oil Feed Line, AN10 Return Line
Hallman Manual Boost Controller
I'll be running this set up in an m50tub25, planning on running about 9psi on stock internals and ARPs. Open to discussion and conversation about it but this is the plan thus far.
Collecting parts for my turbo project.. my goal is to have all my parts collected by December and have the car up and running by spring. Anything I can find used or source from other R3v members would be a huge help, so I thought I'd just put up a wanted list and keep it updated for the following months. Obviously alot of this stuff I can buy new and might end up doing so, but things like an intercooler and Charge pipping already the right size to fit an e30 frame would save me alot of time on the backend! Message me if you anything you want to get rid of.
Things I Need List:
Things I already picked up:
Garrett 57trim t3/t4
GoodNtight Turbo manifold
18x12x3 Intercooler
Charge piping + couplers
LC-2 Wideband
wyntonm BOV
Wyntonm 44mm Wastegate
Bosch 42lb EV1 injectors
MegasquirtPRO PNP
ARP Headstuds
VDO Gauges and pod's set up
2.93 LSD
AN4 Oil Feed Line, AN10 Return Line
Hallman Manual Boost Controller
I'll be running this set up in an m50tub25, planning on running about 9psi on stock internals and ARPs. Open to discussion and conversation about it but this is the plan thus far.
Comment