Announcement

Collapse
No announcement yet.

DIY - E36 window switch retrofit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Just posted a WTB thread at Bimmerforums. I used one of your pictures for reference to what i need if thats okay josh :)

    Comment


      #17
      Re: The E36 window switch retrofit thread

      Originally posted by Eurospeed88
      They will run about $2.25 each from the dealer, however KenCopperwheat said that he got them from BMA for about $1.80 each.
      I just got them today. $3.96 for both including shipping. I guess they have them in stock because it only took about 4 days for me to get them from when I emailed Patrick w/ the part number.

      Now to find some switches...
      Originally posted by Gruelius
      and i do not know what bugg brakes are.

      Comment


        #18
        Josh, it looks like there's a slight gap between your trim pieces and center console. I had the same 'problem' with one of my switches. You have to enlarge the hole a tiny bit more to get it to sit perfectly flush, but then it may not be as snug as before. I had the pleasure of using an extra console when I did my swap so it was out of the car. I opened up the holes large enough, then used hot glue on the backside of the console to hold the trim pieces in place.

        this should clear up all of the questions i get pelted with when I say to use the large base switches and four door/sunroof trim pieces :roll:

        haha good job Josh

        Comment


          #19
          Thanks, Bryson. I noticed the gap as well, I think when I pull the shift boot to vacuum all the dust and stu ff out this week (I had to take off somewhere right when we got it done), I may open up the holes a tad larger, and glue them, like you said. But all in all, I'm very happy with them.

          Comment


            #20
            If anyone wants the .pdf of the write-up, I just had it converted, so PM me and I'll email it to you.

            Comment


              #21
              Nice write up Josh :)

              One question about the one touch switches. Why won't those work? A switch is a switch so the one touch feature is controlled exterior of the switch right?
              Chris
              90 Corrado/91 M3/01 M5

              Comment


                #22
                I think the one touch switches are switching a low current draw relay, rather then switching the power window current.

                The wire size is drasticly different.


                E30 ABS Pump Refurbishment Service
                https://mtechniqueauto.com/

                Comment


                  #23
                  ah.. that would make sense. So along those same lines, would the cars with the circuit breaker above the passenger switch not take a full current load either or is the circuit breaker just inline of the full load circuit?
                  Chris
                  90 Corrado/91 M3/01 M5

                  Comment


                    #24
                    Inline of 2 fatty green wires.


                    E30 ABS Pump Refurbishment Service
                    https://mtechniqueauto.com/

                    Comment


                      #25
                      these are the switches i have, yet another different type from the ones listed...these are the 4 switches out of an e36 4-door...




                      i noticed that all 4 switches i have only have 4wires, but they are the LARGE white base and not the small white base...will these ones work??
                      IG: @Baye30

                      FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

                      Comment


                        #26
                        Large white and blue base work. Wire colors will vary.


                        E30 ABS Pump Refurbishment Service
                        https://mtechniqueauto.com/

                        Comment


                          #27
                          Cary, are those your pictures? If so, I'll buy two of them off of you if you're only using 2. PM me
                          Originally posted by Gruelius
                          and i do not know what bugg brakes are.

                          Comment


                            #28
                            gold, I have the same ones you have there in my car. Large white base. Both of mine have different color wires, lol
                            BimmerHeads
                            Classic BMW Specialists
                            Santa Clarita, CA

                            www.BimmerHeads.com

                            Comment


                              #29
                              Originally posted by MR 325
                              gold, I have the same ones you have there in my car. Large white base. Both of mine have different color wires, lol
                              thats what im saying!! LOL, so yers have 4 wires also? that means josh's writeup is pretty much useless for these switches...exept for the wire testing part, that is pretty good info.
                              IG: @Baye30

                              FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

                              Comment


                                #30
                                Yup, 4 wires for the E36 switch, 5 wires coming out of the E30 wiring
                                BimmerHeads
                                Classic BMW Specialists
                                Santa Clarita, CA

                                www.BimmerHeads.com

                                Comment

                                Working...
                                X