e30 325ix-86: with a Finnish touch

[jute91]

Yeah I would need 50mm long trumpets with 45mm inner diameter.

just like these

http://www.ebay.com/itm/DELLORTO-DHLA-DRLA-45-WEBER-DCOE-IDF-TRUMPETS-VELOCITY-STACKS-FULL-RADIUS-50MM-/121890291265?hash=item1c613a3e41:g:poUAAOSwWTRWunaf

They are just kinda expensive so I have to think about making my own

[SkiFree]

VW aftermarket supplier "EMPI" will have something very similar (and much cheaper).

[jute91]

[jute91]

[litu]

Cool, any updates??

[jeenyus]

where will the throttle be positioned? Great build.

[jute91]

I'm getting the toyota inside the garage, need to get it first running as it's my daily

[jute91]

Haven't been updating this thread for a while...

Here's some photos from the latest










I took the car to the winter safe last october as I started working on my toyota... om606 + 722.6 swap



Last week I got the block back from the machinery.





And opened the oil pump to see the condition...



The cylinder head will have the valve guides replaced and then I will start building the engine :)

[CorvallisBMW]

that intake manifold is so sexy

[jute91]

[pandaboo911]

Is that 3/16" steel for your coilpack mount? Seems like overkill lol

Plenum looks awesome dude

I'd be interested to see your om606 build. I've always wanted to build up one of those here in the states, but parts/engines are limited and there's no aftermarket pumps over here.

[jute91]

Is that 3/16" steel for your coilpack mount? Seems like overkill lol

Plenum looks awesome dude

I'd be interested to see your om606 build. I've always wanted to build up one of those here in the states, but parts/engines are limited and there's no aftermarket pumps over here.

They usually use mechanical pump from w124 om603 with 7-8mm elements for superturbo builds. I'm keeping the stock eletrical pump because I want to study it. https://www.facebook.com/JuusosGarage/?ref=bookmarks

[litu]

Any updates...I haven´t seen any pics etc..Last one was when it was painting