If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
nice where did you get the turbo from? im having a hell of a time trying to find a gt35r. nice looking car
It's the first setup I had for my e36.. it started as an aa stage II.Then I replace the td06/t60-1 hybrid with a gt35r with a a 3 inch inlet...
then I bought a tecIIIr to replace the dme.. and replaced the 3 inlet turbo with another gt35r with a 4 inch inlet. bought 75lb low imp. injectors...
So, gt35r with 3 inch inlet, dme, injectors, hfm, were all extra parts... I had a custom turbo manifold/downpipe made. And that's how I got everything..
o nice. yeah i have been searching for a while. have you built the bottom end yet? and what kinda boost and compersion ratio you running?
I'm still messing with the boost controller...it's different than my other one.. I just barely finished the car and doing some final touches..it's stock with a mls gasket lower the compression to approx 8.9...While messing with the boost controller the other day, I came upon two Kawasakis 750... let me just say that one of them stayed at my blind spot all the way to 130 which is when I began to see him in my rearview mirror.. I looked at my gauge and it was at 21.5 psi.. I took a risk at I still have the e30 stock fuel pump... but it was fun going side ways in third gear.. what a rush.. the other bike was in front of me when he took off and then I followed.. at 120 I was starting to reel him in..
Comment