Fs: M42 stroker kit m47+s52:2064cc

[hesgone2fast]

Ok guys, after a lot of thinking i´m going to sale all of my 2.1L M42
the kit consists of the following:
- M47 crank (88mm) already modified to work on the M42, also the crank bolt holding the crank pulley bought to Metric Mechanic.
- Set of 4 rods from M42, and 4 S52 pistons(86.4mm) shaved and valve pocketed to hold the extra lift of schricks. the pistons have a set of new rings (300kms).
Everything has 300kms(except the crank which has 5300kms)everything is balanced, and the rods are equally weighed.
The pistons are machined to have a 0mm deck height, and to have a CR of 11.5:1
The only thing needed is to bore the block to 86.5mm (I have one if the buyer is interested)
The price of the crank/bolt: 700€, new costs 1000€.
The price of rods/pistons/rings: 300€
Everything is located in Barcelona, Spain. I can ship worldwide and buyer pays shipping expenses.


I reserve the right to end up the sale anytime for having it advertised on other forums

[flyboyx]

i would have an interest in the crank, and also the schick cams but you don't seem to have them listed for sale. not real sure about the currency conversion. if you are talking euros, i think that might be a little high, especially when you factor in the shipping over here.

brian

[kowalski]

i would have an interest in the crank, and also the schick cams but you don't seem to have them listed for sale. not real sure about the currency conversion. if you are talking euros, i think that might be a little high, especially when you factor in the shipping over here.

brian

have you looked at the price of an m47 crank lately? its a high price, but its not high for an m47 crank...

[rThor432]

Let me know what this would translate to in USD. A friend of mine wants to bump up the displacement on his M42, and he's serious!

[gazellebeigem3]

joe, buy this!!! i know you are looking at it!

[hesgone2fast]

Let me know what this would translate to in USD. A friend of mine wants to bump up the displacement on his M42, and he's serious!

In US$, it would be about $1300 for the whole kit without shipping.
On dec 18th I´m flying to Raleigh, NC, if you´re really interested we can talk...

Here´s the link for the schricks:

http://r3vlimited.com/board/showthread.php?t=124219