Hi im about to go back stateside and i need to sell my baby.
its low miles, has around 160 kilometers on it, the cluster says 260 but i had to change it out because the rpms was broken.
Im in iraq now but i will be back in july, i will need to sell it before august because im off to my next base.
Full SS brake lines, brembo blanks, hawk hp pluss pads <80% thickness left only have 3 months on em most winter
Tires will need replacment soon
New subframe bushings
Red line diff and trans fluid
K+N conical air filter
new timing belt and water pump
new lower control arm bushings and lollypops
IE Front and rear strut tower braces
Bilstein sport shocks
Performance Chip
19 lb stage III injectors, uninstalled brand new
rolled fenders, thou the rear fenderwells are a bit rusty especially rear left, i cleaned it up and used rustoleum inside both wheelwells but they can use a cancer cut and welded or glued patch.
M3 shift knob, authentic alex hooked it up when he got his new AC shifter
Comes with a bunch of extra parts, new front and rear main and trans seals SS fart can,
Exhaust needs to be replaced, will be sold with 2.5" glasspack and sections of 2.5" exhaust bends and SS muffler seen on myspace.
Also comes with a ported intake manifold, painted wrinkle black spent like 10 hours on it gasket matching and paintint it, matches valve cover paintjob
i put over $1700 in parts in it,have almost all the recipts. Me and yan did the timing chain and water pump. Im looking to get $2500 OBO
here is my myspace pics, tell me if the link dosent work
http://viewmorepics.myspace.com/inde...lbumId=2165328
its low miles, has around 160 kilometers on it, the cluster says 260 but i had to change it out because the rpms was broken.
Im in iraq now but i will be back in july, i will need to sell it before august because im off to my next base.
Full SS brake lines, brembo blanks, hawk hp pluss pads <80% thickness left only have 3 months on em most winter
Tires will need replacment soon
New subframe bushings
Red line diff and trans fluid
K+N conical air filter
new timing belt and water pump
new lower control arm bushings and lollypops
IE Front and rear strut tower braces
Bilstein sport shocks
Performance Chip
19 lb stage III injectors, uninstalled brand new
rolled fenders, thou the rear fenderwells are a bit rusty especially rear left, i cleaned it up and used rustoleum inside both wheelwells but they can use a cancer cut and welded or glued patch.
M3 shift knob, authentic alex hooked it up when he got his new AC shifter
Comes with a bunch of extra parts, new front and rear main and trans seals SS fart can,
Exhaust needs to be replaced, will be sold with 2.5" glasspack and sections of 2.5" exhaust bends and SS muffler seen on myspace.
Also comes with a ported intake manifold, painted wrinkle black spent like 10 hours on it gasket matching and paintint it, matches valve cover paintjob
i put over $1700 in parts in it,have almost all the recipts. Me and yan did the timing chain and water pump. Im looking to get $2500 OBO
here is my myspace pics, tell me if the link dosent work
http://viewmorepics.myspace.com/inde...lbumId=2165328
Comment